Search results

i replaced a lightbulb and there was a bang. now the light will not go off at all. Can anybody help

i want to put an isolation valve on my cold and hot water supply, in the kitchen. Which should i use, push fit or compression?

If they did, i would be having a full english, instead of cereal for breakfast tomorrrow

the cables are the sort that connect to an oven, live, neutral(both five/six strands) and a single wire earth. They come out of the wall via a switch, they were connected to my old hob. the connectors on the new hob are in a brown plastic block, three live two neutral and one earth the...

What is the smallest size cable i can use with a 6.2 kw hob will the hob work if i take out the links

could i put two of each in the three live strands, and three of each in the two neutrals?? There are links between the lives, and the neutrals, although not brass, but the whole core will denitly not fit into the terminal failing that do i connect the butyl into where the old wire is...

belling crs60 is it safe to trim down the existing cables they were both 6.4 kw

the old ones are oven ones i think, they have 5or6 strands and fitted to the old hob with a nut and bolt. the new hob has small connectors, is it SAFE to trim them down. If not is there a cable i can replace it with, and what would i ask for

the wiring from my old hob is to big to fit into the connectors of my new one. Do i just squeeze them in by trimming them down

Or do i just cram them in

my old hob had two really thick cooker like wires (about six strands each) and an earth, connected by big bolt like connectors. My new hob has tree live two neutrals and one earth connectors. The old wires do not fit. is there some sort of step down box or connector i need??

Thanks for that, i'll have a good look tomorrow

So when i take the old one out should it have three wires?

csr60 mk/ 2 does that mean anything to you?

i just got a belling electirc hob and was going to fit it my self, i assume the wire from the old one will just fit into the new one. Is this a safe assumption?? there does not seem to be a great deal in the way of instructions.

I Have a simalar problem , but it's replacing a dimmer switch. When i took the front off there were three, one with one red wire, the middle was empty but had a couple of green wires hanging loose , and the third with two red wires. Result the thing is not working, the wires to the rose seem ok...

thanks salem2000

Tried that, they looked at me as if i was an idiot, obviously very astute judges of character. I was hoping sombody might have a name for the required item and allow me to hold my head high as i once again enter the darker region that is Travis Perkin. I ended up buying two other thingy's that...

when you fix the water pipe to the fridge is there a special connector/adapter that fits on to the cold water pipe, if so where can you get one?