Search results

I can vouch for this, works great. https://www.waitrose.com/ecom/products/cillit-bang-black-mould-remover-power-cleaner-spray/679798-778624-778625

Just buy the C31 and be done with rip off Ring and Nest!

AC input 242v AC output at 24v tapping: 28.5v This is with the C31 doorbell connected (i.e. under load)

Are you measuring the output with the terminals not under load? i.e. with no doorbell connected? All I can comment really is that I have had my C31 on the 24v tappings since early Jan and it is all working fine, no issues or over voltage reported on the app (not sure it does this though). Away...

What’s the issue with having the SD card in the doorbell? I guess you are worried about theft. Personally I prefer it to record to itself rather than relying on a WiFi connection always being active. As for the transformer, I think the wording in their specs is crap. I have a BG 8-24V AC 8VA...

I believe so yes, https://support.eufy.com/s/article/When-eufySecurity-Devices-Encounter-Power-and-Internet-Outage This has a table of what will/wont work for each of their devices with/without internet and power.. I wondered that if the WiFi is still up (but internet connection from router to...

Not quite sure how the Nest works, but logic says that if it is a WifI doorbell that records to the cloud, when the WifI signal is degraded/blocked and/or your Internet connection drops, then it will not be able to do this and therefore it wont record anything. The only way around this is if...

I have ditched my Ring and fitted a Eufy C31 with a MiniBase chime and also integrated with Alexa. Working great after a few initial frustrations. 128GB card set for constant recording gives just over 2 weeks of recording time. Glad I ditched the Ring! I have it set to record directly onto a...

Thanks for the replies guys.. Had another chance to look at this today. I put food colouring down the pan and with the inspection chamber opened observed the flow. After a very brief amount of clear water i see the coloured water come straight out. Doing the same with toilet tissue in the pan...

Disclaimer: I'm not a plumber... On my MegaFlow system there is a procedure to follow when draining and re-filling the cylinder to re-charge the air gap that creates the flow pressure. https://www.gledhill.net/products/unvented-cylinders/stainlesslite-indirect/ Looking at the manual for your...

I thought all pipe and connections within 2m of the boiler needed to be soldered copper, looks like you have a push-fit and a compression joint too..

All fixed, new pressure relief valve fitted.

Sounds like a classic Frank Spencer sketch!

Thanks or the advice guys, appreciated. Found the replacement 8 bar expansion relief valve to fit direct onto the t-piece. Boiler off until it arrives and is replaced.

Hi, I have noticed a leak on my Megaflow cold water inlet pipework, after the isolator, before the cold inlet to the bottom of the cylinder. It is leaking between the nut and the base of the 8bar pressure relief valve. It is loosing about 1 drip a second so cant stay like this. I isolated the...

So I removed the basin trap, this improved things slightly, the toilet and bath both drain better. I then placed my hand against the open basin soil pipe to block it up and flushed the toilet. As the toilet slowly drains I can feel air wanting to escape the basin soil pipe into the room. So i...

Six months ago i re-did our main bathroom, moved the bath, sink and toilet and re-plumbed to the main soil stack, see image. Was all working fine until recently. The sink continues to always drain no problems, but the bath now drains slow as does the toilet. Occasionally when the toilet is...

The portable screen may well be double insulated and not need an earth. Having said this, you can-not simply take the 'unused' earth and use it as a neutral as you imply.

The standard mains voltage in the UK is 230 volts, with a typical tolerance range of 216.2–253 volts. This is a range of -6% to +10%. Applying ohms law to voltage and current states that the higher the voltage the lower the current. All sounds a load of b0**0**$ to me.

I would stuff the voids with loft insulation or similar.