Search results

Can you explain ?

Thats what I keep telling him !

I get that , there isn’t much I can do know except figure out how to mitigate it Again my roofer is saying he wants to lift the ridges and install lead flashing all the way down moulding it to the tiles and have it run out on the sides around 200mm and then re seat the ridges and point I’ve...

I don’t know the answers to these I’m sorry as but I’ll ask the roofer I’m wondering if we lift the ridges , raise the battens , redo felt and reseat the tiles and then redo the ridges to hopefully flatten out the tiles to seat better

It’s a steel hip beam running down those ridges as per pics

Not very helpful as these were taken at dusk but I’ll post and do some more in daylight His is about 15-16m long

Someone told me it’s possible to install a flashing under the ridges but I’ve never seen such a thing , lead etc … I’ve never seen lead flashings used like that and would be expensive on a 20m run

Yeah it’s easy to do that but being able to solve it is the problem !

Hey everyone Am after some thought and advice I have a concrete tile low pitch (15’) roof , the roof hip beam is made of steel and it sits slightly proud of where it should be which means concrete tiles each side of it don’t sit too well as they approach the ridge , the ridges mortar in ok but...

any help on this guys please... would be appreciated - thks

OK guys, I am looking for some more help - hopefully without too much sarcasm :-) I have sussed out that the alarm fitter has wired up the GSM dialler to the bell circuit on the panel (it's an ADE panel so it's on the switched (-) negative) I am assuming therefore that the dialler will...

alarm fitter left me nothing, then went bust ... so i have had to download it and learn! seems to be sorted now ... thanks for help

Hi guys, i rang tech support, they suggested I power it down and restart it.. sounded like BS to me but I did it nonetheless and bingo I now get a full 5 bars :) is there anyway to actually test the alarm functionality (ie SMS and voicedial) without a full alarm activation (I suppose there must...

thanks very much - yes I will call them tomorrow, I have emailed but that was some time ago and no reply. its odd as I am 100% sure Ive done everything correctly - perhaps its a duff unit

hi thanks for the reply, this is a GSM Dialler :)

Hi All anyone got experience of this? I have configured this in the engineers menu and seemingly all has gone well, but it seems stuck on "intialisation 000 001 002" and then this repeats? Any ideas? thanks

Thanks guys - all is good with the receiver. Boiler pilot light/spark is out causing the red flashing light... next challenge :)

Thanks Simon, so no neutral connection is required to the Receiver-Boiler? This doesnt look like the manual (option b) that came with the unit. Ive read so many different options re wiring this up its becoming a case of wood for the trees...

Hi all, I thought this was going to be an easy job but it's turning out into a ball ache...grr! I'm hoping someone can help. I previously had a wall thermostat wired into the Ns, Ls and Lr inputs on the boiler. Ive disconnected this and wired up the receiver box as per instructions, at...

Hi all, I think its time to replace my ancient Optima alarm system, I want to re-use the existing wiring for the PIRs and contacts along with the external and internal high decibel siren. I've no experience of wiring one of these up, but am pretty competent with most things given a...