Search results

We wouldn't but it's a fair assumption. I was half joking anyway

Strange how voices always tell them to kill somebody, never to help an old lady across a road.

I wouldn't think so, but if somebody's tried it, the proof of the pudding.... To save me reading the whole thread, what is the advantage of the Willis system? Where does the heat come from?

Hasn't been a problem. I tighten and remove the magnet by hand, don't need the plastic wrench thingy

AFAIK it's just an inhibitor. There are other Sentinel products for cleaning, plenty of info on the web.

Is that a pair of alternatives? Iran subsidises Iran's proxies. Who do you mean might start WW3? Not clear what you're saying.

Quite, so the strikes didn't remove it. Important to get rid of the regime, as otherwise they'll be more determined to get the bomb.

I believe the consensus is it didn't.

If it's any help, here's a pic of my Magnaclean, installed (by me) in 2010.

No, it's a system boiler, not a combi

A filter is very useful for sampling the water to do an annual bright wire nail test, and for adding more inhibitor if needed.

What's that got to do with it?

Yes, it's a myth that they came to help Britain. They came to get work and a better life here. There's nothing at all wrong with that, we're familiar with Adam Smith's work, but they didn't come out of altruism.

My bad, the manual does give minimum inlet pressure, at the test point. It's on page 37, says 15mb for the ecoTEC plus 637. There'll be some loss before that point, gas iso valve etc. There doesn't appear to be test point upstream of that, so unless one is added on the pipe just before the...

Interesting. I haven't (yet) found a manual which gives actual required gas pressure, but several of them say 20mb (nominal) which is something!

I wasn't trying to tell you anything you didn't know! I remember seeing a boiler manual which specified an actual pressure requirement. I'll try to find it.

Do you mean the 20mb? Because it could be 17.5mb and meet the regs. Perhaps they say 20 to give themselves a getout, don't know whether they'd get away with it!

I'd be a bit sceptical about the 9.5mb. My boiler needs about 10mb at the burner at design output, so if it's anything similar clearly 9.5mb is too low. There would be some pressure loss over the gas valve and the pressure at the burner, and boiler output would fall. Boiler manual here in case...

Is the maximum loss between meter and boiler still 1mb?

Hope it wasn't a cold day. Are they recruiting? :giggle: