Search results

  1. J

    "Ionisation PCB faulty" error on Britony Combi

    I started getting the above error now and again, but in the last few days it has started happening a lot. Does anyone know what the likely cause(s) is/are. is it something I can do myself?
  2. J

    Apparent blockage in CH circuit - locating problem

    Yes, I think I'll start with your advice and then move on to something else... Thanks for your help and hopefully it works when I get home
  3. J

    Apparent blockage in CH circuit - locating problem

    It could also equally be between the last radiators and the boiler as no return = no flow just as much as no feed = no flow
  4. J

    Apparent blockage in CH circuit - locating problem

    What do you mean by that? You suggested that it was probably in one place and I suggested it could be somewhere else as well - in a far harder to find place. I don't understand your comment
  5. J

    Apparent blockage in CH circuit - locating problem

    I have also come to that conclusion, but is it not possible that the pipe between 2 radiators is blocked?
  6. J

    Apparent blockage in CH circuit - locating problem

    I have cold radiators downstairs, but hot ones upstairs. The feed pipe splits 2 ways a metre outside the boiler and the upward leg is hot but the downward leg isn't. When the boiler fires the downstairs leg does heat, but that is probably just the pipework. As the nearest radiator is lower than...
  7. J

    No water flowing in Combi CH system - Britony Combi SE

    My boiler fires and heats to 80 degrees C for a short time, then cools back down again quickly. The pipes near the boiler heat up, but only as far as the first radiator downstairs and this rad doesn't get hot. Other downstairs rads are cold. Upstairs rads are reasonably warm, but not as hot as...
Back
Top