Search results

the grey wire number 3 is not connected to the room stat,so dont know where that goes will have a look in cylinder cupboard.room stat picture http://img34.imageshack.us/i/dsc03178y.jpg/ 2,3, become live when stat clicked on.just 2 when clicked off. the zone valve is turning and working ok

any idea what wires should be going in the correct numbers,dont understand the orange one,i tried without it connected but still the same.

yes it did work ok,the only problem was that i had to have heating on to get hot water,could not just press hot water and get hot water hope that makes sense.but if they where on the timer and it turned off,it did turn off and the boiler stopped.on the picture of the wiring ,wires 3,4 grey and...

yes its a new problem,my boiler packed in around christmas time and i had someone out and got it fixed.but just noticed the problem now that i have started to turn it to the timer.just wanted to know if someone could spot the problem with the wiring sve me getting them back out,if it was a...

no idea what the grey wire goes to,will have a look after work.yes the orange goes into the choc block,nothing to do with me though thats how it was.

when both my programer sliders are in the off position i can turn the room stat to click on and the boiler fires up and turns the heating on and like wise when i turn it back it clicks and turns the heating off.it is a potterton controller,and promax 15 boiler sealed system.want to use the...

got up friday morning to no heating or water,went to the boiler it was not lit.pressed the reset button and it fired up thought that was it.ten minutes later the mcb tripped in consummer box for the sockets,reset it went back to boiler it smelt a bit of burning.turned the programmer to off and...

ok thanks for the help.

there is one but i have checked its not on,its been ok the water till the last few weeks,since i have started to put the heating higher the water looks like its going with the heating

thanks spec,already checked that and its moving ok the motor and also the valve i can turn with my fingers,any more suggestions before i get a plumber out.not had the hot water turned on now since yesterday morning and its still red hot.

just an update,turned the hw off at the timer this morning,just got in and the water is still just has hot even though the controller its switched off,could this be the hw motorised valve not closing? any suggestions.

so if i click the stat to turn it on there should be no power on the brown wire.i have just done that and it went live and the valve opened,if thats what you meant.i have had the hw turned off since i posted but either side of the valve is too hot to hold if thats any useful info.

just tested it and when the valve is open there is still power on the brown wire,does that narrow it down?just taken the motor off the valve and it is turning it.

thanks mate,just gonna get my tester out now and have a look at it thanks

i have a RANGE TRIBUNNE HE cylinder and i have turned the cylinder thermostat right down but the hot water coming out of the taps is too hot to put hands under.but before i change the stat was just wanting to see if anyone thinks there could be another fault and not the stat.there is power going...

i have a glass fronted gas fire with a balanced flue. i'am looking at replacing it with a open flame gas fire. i need a prefabricated flue box as the existing fire is all one unit. The current flue is central of the fire and goes horizontaly to the outside wall. can the horizontal flue be used...