Search results

Yes,thank you anyhow.I have rang council dept,local tip's and the last one a local goverment ran campagn to stop dumping,told me "we have your phone no,any asbestos tanks found dumped we will have you".nuts isnt it

SORRY, didnt read it properley.I would get it painted or if you want buried under the floor again.denso tape is horrible and sticky but is made for the job,wrap it all around and you have no proplems

Outside your house?. Get him back and get him to sort that.At the least it should be protected using correct pipe and why didnt he bring it in the house and run it up and over or any other way,except outside unprotected.If the copper is protected by denso tape or sleeved,then cement wont bother...

How many rads have you got?.If you wanted it done without expense being more than need be,go for a swap maybe a ideal mexico or potterton kingfisher ,which can come with f/flue option.I would look at both option's,a combi,you would need a large 30 k boiler,and you can site it virtually anywere...

O.k crizzy,i will look out for you later.If i can help you, i will. cheers

I finished a nice 7 rad & combi installation yesterday,but i had to return today to figure out how to get rid of the old f&e tank. It's the old asbestos type tank,very very heavy,so i had to ask my neighbour's lad to come and help me move it from the bathroom cupboard,we have got it outside and...

there ancient,they have a f/l valve dont they and the tail isnt 15mm its like a l/shield tail ,if i remember ,its new valves all round.and whats the grey thing nearest

Has 2 screws in the corners,what name is on it?. Undo the screws lift head off and see what its doing then if its doing the same then you can just get a new head,unless its damaged the body,but i doubt it

your r/stat will go to 1 & 2 or r/s and r/l,were you take the 2 wires out put a link in place

Gas4u.How long and what do you do to commision a new boiler.If the gas pressure was ok at the boiler,it wouldnt be easy to find as the h/w was ok

Yes,you will need expansion vessel and the kit,that comes with it.it wont take a fitter long to do.a rad about 32 x 24 k2