Search results

HiDee205, sorry for the delay...pc problems! The current opening is 58cm wide to outside edges of fire inserts x 80cm high to top edge of throat lintel. Want to open this up to 80cm high x 85cm wide. Here is a picture showing flue with underside of throat lintel. the bottom of the...

With the square edge board you have to tape and then feather over a much larger area to hide the joints. If I were you I would put up the board with dry wall screws. Then tape and feather with Easy fill. Seal the easy fill and then just paint the whole lot! Make sure the Easy fill has no edges...

Have started to open out the fireplace to fit a small woodburner and it looks like this. No sign of a lintel!!! Except for the throat lintel. Whats my next move? Thanks in advance for any ideas.

if you have this problem in future you would be better of using a wedge shaped vandal proof housing.

You dont want to install cctv cameras that can be unplugged by any do badder! Re power most cameras we use normally draw about 800ma. I would install a lockable 10 x 1amp psu on a fused spur, and and run .5 2 core to each camera. If they want to add additional cameras later the provision is there.