Search results

Done and done. Thanks for all your help guys. The pipes made a hell of a noise and were sputtering when I first tested it all out but works a charm now!

I'll give it a go and reply in a couple days once I've done it :) thanks for the help and other advice I'll keep an eye on the thread

Let's hope so. So do I just order a "28mm to 15mm reducer" and fit it 'backwards' so to speak?

I've measured and its 1", what would I need to get to attatch the two? I'm guessing once I've got the right fitting I can just use a pipe slice on both and run some new 15mm up to the fitting and jobs a gooden?

Hi Guys, Sorry for the late reply I'm on night shifts and needed my sleep :(! Anyways heres the photos I just took if you need more let me know. Seems like the previous owner has used some famous PTFE tape on the inlet already, I can see you guys love it. http://imgur.com/a/s4A8M I...

I'll see if anyone else can comfirm as once I cut into it I won't be able to reconnect if it doesn't work. But if I were to try it I can only find reducing connectors. This would be going from 15mm to 28, would it be okay to use a reducing connector?

[/url] I wasn't sure on the material. Its definitely 1" outside diameter. Have you got a link on a compression joint that would do this as I can't find one anywhere.

Copper piping. And hot water is from combined boiler. I really see no need for the cold water tank the kitchen runs straight from mains? Edit: I believe the 1" pipe is copper I might be wrong, how can I tell?

Hi guys, So at present I've got a cold water tank and it is pretty much useless and lowers the pressure. I wanted to bypass it and thought it would be relatively simple but the inlet from mains is 15mm and the outlet for the bathroom is all 1inch. I can't seem to find a connector to bypass...

[/url] Why is that? And I've had a look at that but can't find much information on specifics like if I can just wire direct or it needs anything specific or what type of wiring?

Bump, any help?

In my bathroom I've got one light fitting with 4 GU10 lights facing different directions, I want to turn this into four seperate downlighters. I don't know much about it but I'm willing to learn, where is the best place to find out how to go about this? Is it simple or quite complicated and what...

Hi guys, I'm going to be redoing my bathroom in a couple of weeks. I've looked about online a bit but not found much specific information. Got some pretty big wall tiles (61.5cm x 30.7cm) coming but the information I've found is all for pretty small tiles. I knocked a couple of the...

They're all working for me? And where would I find that from? behind the control panel it says both where should I be looking. Heres what the sticker says: http://imgur.com/DGBMMV8 As you can see it says both 242 and 824 inside. Thanks!

Once I turned it a couple times and had the central heating the pressure only goes to about 1 now so maybe this is connected? Hope someone can help! :oops:

Hi there, Hope you guys can help! Been lurking for a while and you guys offer loads of knowledge and advice, but something I can't seem to find generally is the above boiler. I've been in the property for a month now (and it was NOT looked after. Gas man reckoned it hadnt been serviced since...