Search results

Thanks, Massive help, Have a good evening.

THanks for your help, however, not looking to rewire in the fan. What goes where to get the light to work again?

Thanks SParky Spark, could you shed this light in my direction?

Lets forget about the fan, I don't want it wired up anyway, and ahving taked the cover off to see what wires went where has let me see a bit of scorched flex, so decommisioning this. The pendant fitting has 2 sets of cables going into it. the 3 core+earth and a 2 core +earth. THe pendant has...

there was no seperate isolator for the fan. If there had been, it would have made the job easier, would have just flicked the switch. The fan was wired in on a timer to stay on a while after the light was turned off. Essentially this was hard wired in, the only way to service the fan would...

I have checked the wiring going into the fan, which is now not connected to anything. Grey is Neutral, Brown is S/l and Black L. So how will this translate back to my switch? I should have written down what went wear before disconnecting, but I remember some cable twisted togther - blacks...

It was nly installed less than 10 months ago, and by a pro, so can I assume what you say is correct? And also If I did get it wrong, what is the worst that can happen - blow a fuse?

SO, I have disconnected the extractor fan from the light switch as I was getting fed up with it kicking in and sucking out all the hot air from the half converted garage. So I have removed the cable going to the fan from the switch, and am left with the four core cable form the light. I have...