Search results

this is not about position of a cable , this is schematic to assess the amount of devices and sockets on each circuit, may be the order in which those will be on the circuit(s). Washing m goes second after fridge (which is first on the right end of ring , and dishwasher is the last on the ring...

what if we keep part of main (whole house) ring circuit which is currently passing through the room for everything above worktops: like microwave, hood, boiler, and 2/3 double sockets. this way the worse case scenario total load for dedicated kitchen ring circuit will be under 32A . If we...

gosh there is a glitch in the matrix, posts are randomly disappearing and reappearing

thanks

is it any better? Eventually we will move washing machine and filter to utility room (once the next stage of renovation is complete), so there will be less load in the kitchen.

Typo?

thanks

gosh you are sensitive, mate, I can see you've managed to understand the term. No offence, I am gathering opinions from every enthusiast and professional, but would give a bit more weight to pro's opinions. However even pro's are contradicting each other quite often. As for the term I guess more...

Are you certified electrician ? Thanks. Seems like majority is for separating hob and oven though . At least from my "current" knowledge . Checking similar forums elsewhere and asked my previous certified electrician. I would probably put 20a mcb on oven circuit

Wither way : one ring or two radials , both ways will comply with regs?

So ether way is within regs? (Just checking: are you certified electrician?) thanks

this was my initial design

Hi everyone, please advice and comment on the attached wiring diagram for a kitchen. There are mixed opinions on the need for FSU-s and number of circuits required. Distance to cu – 8m running under timber floor. kitchen size – 3.5M X 2.5M

I drilled the supports and did the gradual angle after all :)

Is it within regs?

Good, i was about to drill bricks, but now realised i will need to cut the pipe and straight couplers in order to fit the 3m pipe in those holes, which means another trip to the shop Quote Quote Report •••

Good, i was about to drill bricks, but now realised i will need to cut the pipe and straight couplers in order to fit the 3m pipe in those holes, which means another trip to the shop

Does anti syphon has to be on top of joint? There wil be fridge on top, or is it anywhere up the pipe? Under kitchen sink for example?

Hi everyone, I am Joining kitchen waste to bathroom waste. Easiest option to run pipe under floor boards on too of beams , however this way the lowest end will be about 20 cm higher than bathroom pipe. Is it ok to drop to it at 45 angle of should I drill holes in bricks (i only need 2 holes) to...