Search results

My appologies i had overlooked something on the specsheet from Celcon I checked it again the spec sheet says a 300 wide solid block (no cavity) 16mm render outside 30mm thermalite basic inside gives a 0.3 U value

width is 300 then 40mm insulated plasterboard which is not much more then with normal brick/block 100mm brick 100mm cavity 100mm brick insulation value of the celcon standard is arround the 0.15W/m2k which is ok - isn't

Goes much quicker, and more solid

On the inside we will use insulated plasterboard There will be no cavity by using the 300mm thick blocks

I thought it was a standard block

I'm planning (have spoken to the building inspector and he is ok) to build my two story extension in block work, goes quick and is solid, and, the outside wall is going to be rendered (hence the blocks) I’m looking for a 3.6n block (these are according to the inspector enough) So I’m...

I will give them a call

I will have a look if i can find it pm me then i can send it by mail It will take you a whole day to put the shed up, at least it took me a day and i was very fast.

Does anybody now of a good paint spraying course in the croydon area I want to send my son to one, so he can do all the spraying of my cabinets in nice gloss white etc So there hecan learn all the tricks of the trade Preperation / mixing etc etc Thanks Chris

9 inch is fine, but then you have to do it from both sides as the 9 inch as a cutting depth of 2 to 3 inch

If that would have happend to me, i would have thought i had hit a pipe I will be honest i have never seen springs that powerfull, but everything is possible I have no idea with so much spontanious water what would work in your garden

you sure you have a spring as you say you have heavy clay soil, well heavy clay soil doesn;t drain - well so it could look like you have a spring, but actually you have a lot of standing water on top of the clay

are they usefull to work with are they worth the money

is the loft insulated / boarded / easy accesable So you know you cannot share the chimney, the gas heater needs a flue straight outside (shorted distance possible)

Are these razor decks any good? (scafolding)

you want the water heater fitted on the chimney?

are the boards still in a reasonable condition, so you can re-use them take them off, clean them and then put them back on. it will safe you a lot of money

Didn't even know these existed I always repaired them properly

What do you mean?

is is surface mounted?? 1 gang vs 2 gang stands if it is for a single build in box, or for a double build in box. I would go as it is for garden stuff with a double ip65 rcd one surface mounted, and as said before, if you can get it in the ring, perfect / better