Search results

I have a combined vdsl modem/router but it has no phone socket so I'll wait for the ISP to send one out in time for the digital phone change over. I'm content to keep FTTC service.

I currently have Talktalk Fibre 65 (FTTC) and landline telephone. Will the ISPs send out routers with a phone socket when they start providing the digital phone service?

A belated update on this post. The washing machine seems to have recovered full function. Its started heating the water again and although it only gives a 30 min wash, it now completes the wash, rinse and spin and Ends the wash.

When I say recently acquired, maybe about a year ago. I purchased it to clean the all the tap seats in my house. Also fitted new washers. The taps in question are in my aunt's house. Cleaned up tap seats and new washers will sort the job out and stop the slight drip caused by pitted seats.

I was going to use my recently acquired Rothenberger tap re-seater (3/8", 1/2" and 3/4") to clean the mixer tap seats in a 40 year old house but the tool would not screw in to the tap base. Do older taps use a different thread on the tap valve collars?

Who's making the best aftermarket suspension these days? I know Apec now supply suspension parts but that stream is coming from NAPA who now own Apec so likely, at a guess, supplied by KYB.

Belated feedback on this one. The culprit was the n/s sway bar link. The fault was not evident until driven some miles and the suspension warmed up. When I parked up and twisted the link, I could feel the 'snatch' in both ball joints. I replaced both sides with Moog brand from a local factor...

Not really if its an FOC parts and labour c/o Vauxhall. Merely my curiosity about the part, why it needs attention.

My sister has told me her 01.2023 petrol 1.2 Corsa has a technical recall from Vauxhall concerning an 'oil jet cooling nozzle'. From what I've seen online, this is a tube that sprays oil up underneath the pistons. Am I correct?

This photo is of the back of the lcd display that lies on the pcb. I can only assume the lcd was bonded to the pcb.

Its a kitchen weigh scale, Salter brand. Was asked to look at it. It was switching on but not displaying any weigh values. When I took it apart, the LCD was loose. Can these LCD displays be easily bonded back on to the PCB?

Both wheels need a bit of attention, the one with a bit of a growl mentioned above and the lock side needs tightening up a bit. The door's always had a bit of a click sound when being closed and I noticed the door edge lower is hitting the frame. The bottom of the door on the lock side has a...

All done! Used a long reach ph2 bit with 1/4 drive ratchet. The ph2 driver handle was too thick to get the driver blade level and seated on the adjusted head. Now the door is running on the wheels, one of the bearings is growling a bit so either dry or worn. Thanks All!

I want to adjust the runner wheel height to lift the bottom of the door frame off the sill. Does anyone know what tool is need for the adjuster? I've inserted the likes of philips, straight blade and allen keys in the bottom hole but none seem to engage with an adjuster.