Search results

yes full power :D

i have never seen 2.5 1mm cable do they still do it? so thats why im getting a higher reading on the cpc test :D

done a test today on a ringmain and i dont no if its just my eye sight but the cpc in the 2.5 t+e looked to be 1mm instead of 1.5 :roll: and the reading on the end to end on the line to line was 0.43ohms neutral to neutral was 0.43 ohms and the earth to earth was 1.04 ohms which i...

i always find that when im doing pir tests. the cables to the smokes should be earthed what i normaly do is get a bit of slack on the cables and redo them :D

thanks for that adam151 :D

alright lads just a quick one im doing a periodic domestic cert (test) on a flat it has two ccu,s one for the sockets cooker lights ect and the other ccu is for the storage heaters should i do seperate certs or both on the same one :roll:

thanks for the replies i just wanted a little bit of info before i got to the job :D

true thanks anyway :D

alright all im going to a job in the morning havent seen or been there yet but i have to put a new mcb in the ccu for thr lift im not sure yet if its rcd protected? with it being a feed for the lift should it have a rcd, rcbo protection or just an mcb the reason i ask is because in case...

do you mean niceic , napit ect :D

i personally would not use connecter blocks that is a very poor way of doing it :(

i have seen worse :( and im probably not the only one :?

personally i would say to get a pir test done first :D

you should use the same size as the wall socket :D 1.5 is unacceptible

your proberly better starting on the 2330 level 2 and then level 3 courses then go from there or the equivelant if the 2330 course changes :D

well spotted p4ult :lol:

true :lol:

like i said im no expert :o

yes take a feed from that to a switched fuse spare and a 3amp fuse use the same size cable from the socket to the sfs then from the sfs you can use 1.5 ect :D

whats the light off the back door getting its feed from? you could spare off a socket circuit to a switch fuse spare if you have any close to the light you want 2 install at the side of your house