Search results

Hi JJ, Thanks for your reply and comments. Good to know that if the compressor runs, for even just a short time, that means the relay for it is ok. I agree if it is a compressor fault, or gas, it will be beyond econmic repair. Yes the four wires are as you say: Two for the bulb, which works...

Hi All, I have a Beko Frsot-Free Fridge Freezer, model num CXF 5083W. Its about four years old. It just suddenly stopped cooling in both sections. I turned it off for a several days. There is a thing about ice buildup in drainage areas, and some water came out, not much. When switched on the...

Hi McrRed, Thanks for your comments and info about the on/off timer cycle. This is what I have had to do now, and I've currently got a stable temp setup with 15min intervals for on/off. I've also fitted temp sensors to the fridge and freezer sections so I can monitor them and can easily adjust...

Hi, So, anyone know how to open up the top of a fridge to get to behind the wiring ? There is no sign of any screws. Here are some pictures of insde.

Hi I have come across another interesting wesbite for finding and ordering spares, with a forum for some help. They have lots of great articles as well, and this one about Frost Free Fridge Freezers was useful...

Hi JohnD. I'll have to hunt for such a diagram. I was hoping someone on here migth help in finding such. Or in finding a temp probe item which would be a fit for this unit. I only got the circuit board by taking the eixisting one out. Searching for the model "Bush XYZ" doesn't get to many...

Hi John, I've read a few of your other messages related to similar problems. Thanks for posting so much useful advice. So, I emptied my fridge and freezer, and switched it off for three days, with the doors open. Some water came out the back, but a not a lot. It was in the garage, and the...

Hi JohnD. Yes its advertised as a "Frost-Free" fridge/Freezer. I dont have a thermometer, but I could probably get one cheap if necessary. Im not sure about vents/ducts between the top and bottom chambers. Would these be visible inside the fridge ? All I can see is a v-shape channel with a...

Hi, We have a 6ft tall Fridge Freezer, 50/50 split. Its a Bush BFFF54170, about 5 years old. There seems to be a few people with simliar issues on similar fridge/freezers, different brands. The fridge compartment is getting too cold, and freezing some of the items. We have had a few exploded...

Hi, We moved into a house which had a Beko oven, Model number OSF 22120 X. There are three knobs on the control panel. The middle one, the timer, was freely rotating in the mount. I couldn't find any pictures or info about this model, so I am writing up my experience, with a few pictures...

Pictures of the two control panel screws now added to above sequence. The panel is still quite a tight fit under the top cover, so with knobs and screws out you have to pull at it quite firmly, ease it out either side a bit.

Hi Clause, Apologies for the delay in replying. If I remember correctly there are just two screws under the knobs panel. About 3 cm in from each end. You have to open the top oven/drill door fully to see them. I will take a picture this evening and post it. Cheers Colin.

Some comments and pictures while fitting the door catch. New catch, . . . . . . . . . . . . . . . . . . .where it goes. . You DO NOT need to remove the oven self-cleaning linings. You need to remove the knobs and front control panel. There are two screws under the control...

Hi, Yes I got the catch replaced. You do have to dismantle a good part of the back, front and side to get at it. I took pictures in the process. I'll try to post them on Monday. Cheers.

Hi, The main oven door catch for my Hotpoint HUE61G cooker is broken. I can get a replacement easily enough. I'm trying to work out how to fit it ! The door has hinges on the side, not the bottom. And the catch fits behind the front panel oven surround. There are two screws I see from the...