Search results

Hi, This dishwasher is 8 years old and starts up as if its working ok but no water. Could this be the inlet valve or a sticking float switch? Which is more likely considering water appears to be getting to the machine ie no hose blockage. Can I test the float switch other than exposing the...

Hello guys, I have read quite a few forum articles on the above and one person suggested using Plumbers Mate and trimming the excess off. I presume you would have a rubber washer between the underside nut and the ceramic and that you wouldn't apply to much force lest you crack...

Hi Everyone, Im not sure but is it ok (17th Regs) to fit a 13A power socket and coax cable outlet onto my chimney breast in case someone in the future wants to fit a TV above the fireplace (not an active fire - probably electric for decoration)? Im refurbishing an old flat...

Hi to Everyone, You can have a coin meter fitted to your electricity supply input so as people don't go mad and run up a huge electricity bill BUT is there a corresponding device which a landlord could fit to control the heating oil?? Thanks in advance Alex

Hello Folks, Im after some advice from some of you knowledgeable heating engineers. I own a holiday home and its heated via an OIl Fired Grant Boiler. The heating is split into TWO ZONES for upstairs and downstairs and also HOT Water. This is done through a HORSTMANN Channel...

Hello Everyone, Just to inform you guys I finally got round to buying NEST Gen 3 and today I managed to get it fitted and working (thats the PLUS bit!!) I fitted the Heatlink on the side of the cross beams in the loft approx. 2 feet from the boiler. I fitted two...

Hi Everyone, Im planning to install a NEST Thermostat on my gas combi boiler. Its an oldish Halstead Finest Platinum. The current thermostat is a Danfoss RMT230 and its wired directly to the boiler with two wires. Now heres my problem and NEST wont comment. I can wire up the...