Search results

We have a wet UFH system with Komfort touchscreen thermostats which don't turn back on after a power cut. The programmed settings are retained but the thermostats have to be turned back on via the on/off button to get the heating working. Does anyone know of a suitable replacement that would...

Hi System is: 24i Greenstar System boiler, 6 years old 14 radiators + HW (S plan) (2 replaced in August) Magnaclean on return close to boiler Honewell Auto Airvent on HW flow adjacent to Cylinder Pump setting 2 Problem is: Frequent bleeding of Magnaclean and highest radiator - air not gas...

Hi I want to replace the double eurocylinder locks on our patio doors with single ones so they can just be locked from the inside. We never use the exterior key access. Is this possible and can I replace the outside handles (or the pair) with ones with no exterior keyhole? Many thanks

Hi, I'm replacing some older type LV bathroom downlighters which have an 85 mm dia hole. Most new ones are around 65 -70mm cut out with an overall diameter of 80 mm. Short of filling holes, replastering (pimply artex as well) and starting again, does anyone know of any conversion fittings...

Please could someone clarify the "Loss of Communication Setting" option (parameter 7LC) on the CM927. I understand the principle in that if communication is lost between the two units then fail-safe keeps the relay and hence boiler off as one option (0) but what exactly are the time periods...

Hi. Can anyone please tell me how to gain access to the door internals of an AEG 50750I (integrated) - I need to get at the control module at the top. I've tried removing the screws from around the inner s/s door lining but although the door parts it seems to bend or flex at the very...

Ever since we had an extension built (in 2000) when the wind is in a certain direction towards the eaves we get a low roar (as if a heavy lorry is passing) when the wind gusts. The roof is lean-to and is tiled in Redland Regent. I believe that the noise is coming from the ventilation system...

Hi I want to gloss paint a north-facing porch-protected front door that has been stained originally with a Dulux Woodstain and latterly with Ronseal 5 year Woodstain. I've started to sand it lightly but the top coat is starting to peel in some areas rather than just flatting off leaving a...

Hi I need to get access to change the on/off switch which has jammed (on luckily.) Could someone tell me how the top fascia is removed please? And a real bonus would be the swich part number if anyone has it! Many thanks Terry

Hi - I've just had a quote for new fascias etc and was told that the trade price from manufacturers is increasing by 10-15% in January. Anyone else heard this? Thanks

Discovered damp patches on ceiling today and found that there was a huge amount of condensation around one of the two 25 gallon loft tanks (the one with the mains feed) which had gradually collected and wicked through the loft insulation. We had the loft re-insulated about 12 months ago and the...