Search results

Does anyone have any experience of this filter ? Was looking at the Fernox Tf1 and the Spirotech Magnaboost and saw the Seninel one. Any opinions or experiences gratefully received. Thanks

Have searched for similar threads and although there are many the majority seem to be that their heating comes on briefly at least, my hot water is fine but when I try to get heating there's no ignition at all, the only activity I can hear is the pump but it seems a bit louder than usual and has...

i have a potterton puma 100e combi boiler , i did think for a while that the expansion vessel was going but now i'm not so sure. it runs away fine until intermitently when running hot water ( particularly the bathroom tap ? ) the pressure in the boiler will start to rise and if i'm not quick...

hi, i have a potterton puma 100e combi boiler and the pressure vessel needs replacing , if i don't want to shell out for a stock one and instead fit a remote universal type outside the boiler how would i know what size to buy ? most people seem to suggest fitting a t piece to the existing one...

i've already posted an update on an older thread re this but i thought i should start a new thread for this i have a potterton puma 100e combi boiler and the prv sometimes activates but only when there's a hot tap running for a while , what could cause this ? the pressure vessel seems fine...

i have a potterton puma 100e and last week the prv activated a friend of a friend took a very quick look and said it could have been an air bubble making it's way out which caused the pressure to spike and activate the prv ? i then noticed that the pressure was slowly dropping and...

i have a potterton puma 100e with a myson compact cp51 pump fitted which needs replacing , i'm struggling to find anyone to supply this pump , does anyone know if there is a compatible pump , i bought a grunfos pump which i was assured fitted which it kind of did , it bolted on ok but leaked...

hi all , i have a potterton puma 100 which i have just replaced the pump on , i put in some system cleaner and sludge remover , i have removed all radiators individually and flushed them through , and after putting everything back together i still have the same symptoms which are that the hot...

looks like i need a new pump , are there alternatives to buying the same pump ? screwfix do a couple of reasonably priced ones but how do you know if they are compatible ? what are the important things to compare ? thanks

have had a look around and i can't find a drain point to flush my system , i have however found a red stopcock below the boiler which is connected to both the flow and return pipes to and from the boiler , can this be used to isolate the boiler instead of using the red and blue plastic taps ...

to fit a new prv to a potterton puma 100e boiler as far as draining goes can i switch off the boiler release the pressure in the system using the faulty prv , switch off the main water stopcock , open the hot and cold taps , and drain from the drain screw below the pump , would that drain the...

hi , been having problems with my boiler , gradual drop in pressure over the last while requiring regular re-pressurisation , pressure vessel seems fine , found a small weep on one of the radiators yesterday , tightened up connection and leak stopped , this morning no pressure in system ...