Search results

Correct - but by using the "quote" to reply you repeated my pictures which effectively doubled the space used. Forums have a limited usable space that can be used - pictures use a lot of space. I would delete mine after a few days

The shower screen hinges out over the toilet and touches the cistern when about 75% open - you can't have it all with the limited space.

Hello chaps - Only thought it polite to come and show the progress so far after your help a few weeks ago. Always like to give it a go and learn by mistakes - presently I have got this far. Bath, Toilet, sink, shower screen, cabinets and tiling all done by me - not the quickest job but I...

Just thought it would be polite to come back and update on the problems that I had. 1. The shower in the shower en-suite had very low pressure. That turned out to be an air lock 2. The low pressure thru the taps was cured by adding some new low pressure taps - got good flow to the taps...

Have changed the taps to some low pressure ones. Flow thru the taps is a lot better. The shower on the bath is lacking some power though - wandering if the smaller bore of the gate valves is restricting the flow.

Thats why I was asking here... :wink:

Looking at all the taps forsale around various sites I see loads with 0.5 bar or 1 bar minimum. Could I presume that a tap set with NO rating is ok for gravity fed bathrooms.. Don't seem to find taps listed with "OK for Gravity systems" Many thanks for the help guys - always beleive the...

Before I started I had good pressure in the system - how would I know if I had 0.5 bar :?:

Taps are new. Aquavac. - Did a search - vacuum cleaner. Better explain a bit more please.... :oops: :oops:

Ah! Yes tiz. Had a look at the tap box - says I need 0.5 bar.... :oops: But why would it effect the shower :?:

Was here a few years ago and the advice was excellent - so here we go again. I am changing a bathroom suite. Yesterday I removed the bath and added two shut off valves to the hot and cold pipes to the tapes. See the picture........ Valves are fully open.. 8) I now seem to have...

Just like to add, thatI am in the engineering maintenance industry and I get to travel about in various factories. There are a lot worse jobs out there. I have seen brain dead people who have stood 8 hours a day at the same machine pulling the same lever and only stopping at tea breaks...

Righty ho! I have a Potterton Nettaheat Electronic Gas boiler on the Utility room wall. boiler is 12 years old. Two pipe come from top of boiler into ceiling above I have just knocked the kitchen joining wall out into the utility room so the noise is noticeable The noise is only...

My wall mounted Boiler in the kitchen has this sound like falling water coming out of the pipework above it. I presume there is air going thru it somehow. Very noisy when boiler stops burning. Any ideas or cures

Hi Ya chaps. I am putting in a new kitchen (slowly) :? . I need to move the cooker and extend the cable. I don't wanna change the cable. I need to extend by about 4 foot. Is it ok to join cable. Thanks for any help, may be back with more questions. :wink: Del