Search results

  1. B

    Intermitent fault on baxi 105e , maybe ?

    Have had this intermitant fault. It eventually (over 6 months) became more constant and I ended up having to have a new PCB fitted to resolve the problem.
  2. B

    Heating problem with a Baxi105e

    Yes the heating knob turns fine from 0 to full. Its set to full now so the temperature is running at 40 deg. If I turn it down to between 3/4 and half the temp drops to 30 deg, turn down to 1/4 then 20 deg to off.
  3. B

    Heating problem with a Baxi105e

    The Gas valve was left as was when the PCB was installed, it wasnt touched during the replacement and worked fine before it was swapped. You can turn the heating down from the 40 degrees to 20 or off by turning the knob so I assume the knob is working ok. Cheers
  4. B

    Heating problem with a Baxi105e

    Hi all, I've got a Baxi105e which has recently had a new circuit board fitted. I've just noticed that when you put the CH on it only reached 40 degrees no matter how you have the control dial set. The water temp works fine however you set the dial but the CH wont. Dont know if this is a...
Back
Top