Search results

Hi, Just seen your post so this is a rather late reply. I have the same problem at the moment and have discovered that the part that is causing the plug not to 'click' is called Clicker Waste Mechanism and can be purchased online. The cheapest I have found so far is £2.99, haven't found...

Hi - I have a Baumatic microwave about five years old model BTM25SS and ideally I would like a photo of the electrical/electronics to enable me to reconnect two or three wires. Here is the story. As anyone who has this model will know it is a night mare to replace the bulb. You have to strip...

Hi Igorian, Thanks for the reply. Yes I searched hidden files and folders. Martin

Hi - I recently had a virus problem that I couldn't get rid of and ended up having to reformat the hard drive and reinstall. I have a network hard drive, so I backed up the whole of the PC's hard drive to the network drive. I made 2 or 3 backups over a period of a few days, just to make sure...

The PCB board didn't show any faults. I established that the pump wasn't working so replaced it. I reassembled the washing machine and started a drain cycle, which worked fine. We then put the machine on a wash cycle and it behaved as before. It took in a little water, the drum should then...

Hi Rocks, thanks for the reply. Yes the wires were plugged into the pump OK. Is a continuity tester the same as a multimeter? I was able to borrow a Draper Multimeter. I'm not experienced with using it but set it so that it beeped when the two metal probes were in contact. I took the plug...

Hi - We have an Indesit WIL153 washing machine with a problem. Whichever program we start the machine in, within 10 or 20 seconds it stops with green LEDS 1,3&4 flashing. I have discovered that this is an indication of a 'pump/drainage problem'. I am wondering if it is really this or maybe...