Search results

i haven't used Osmo Raw but if it contains a white pigment it will be a wipe on wipe of method of application

Hi Im sorry to say but it will need sanding of and redone again properly

Hi i have got floorboards to sand and the client would like to have the floorboards lifted and the subfloor insulated with kingspan. what thickness of insulation is recommended? Thanks

You will need to prime the floor and stick it down with ms polymere adhesive £400 to put the floor down only would be a good reasonable price Plus in most circumstances with prefinished oiled floors you Will need to put a top coat of oil on

You need to be more specific. What type of wood. Solid/engineered. Oil or lacquerd. Dpm?. Im not calling you out but 6 floors I have went to sand this year all solid oak which have been fitted by chippys and they have been fixed by a paslode gun. One inparticular was 220mm wide pippy oak solid

Don't do it get someone who can

HI, i got rid of my emersion tank/boiler which was in a cupboard in the bathroom when i got gas central heating installed but the electrical boxes have been left on the wall in the cupboard (off peak and mains). I'm having my bathroom refitted and need to know how i can capp these of or how i...

Well, "you can lead a horse to water"

You would be better of putting a full bodied hwo on your new floor first then following up with a maintenance coat in a months time. The oiled floor you bought is more than likely just got a primer oil on top hence why its a flat matt and looks dull a maintenance coat won't give the floor the...

TREATEX best hardwax oil out other than pallman magic oil which is harder to get and for professional use only

Don't waste money on buying reclaimed blocks by new they are not that expensive it's the fitting and finishing that costs£££

how can i get my american bosch 1250devs sander 120v 50-60hz 6.5 amperage to work on 240v. the sander is sold in england as bosch 150gex turbo Thanks

Am I able to put on this beeswax (http://www.diy.com/nav/decor/paint/w...-500ml-9253240) and then apply a clear liquid matt varnish once it dries No use a colour hardwax oil

undercut the bottom stair with a multi tool and fit the flooring under

here is a pitch pine floor treated with lye before a hardwax oil you will have to sand to bare wood again and apply lye before oil

treatex is one of the best hardwax oil teatments out. Like any hardwax oil finish it needs cleaned and maintaned properly. you could probably salvage it by buying the treatex maintenace kit

the plunge saw is the way to go. when it comes to it u will see way

tell the people who supplied and fitted the floor your not happy it isn,t what you orderd and your dissapointed with the fitting, get it ripped out by them and go and buy your product of a reputable shop

it sounds like a fitting problem. you mention about the click system having plastic in the butt end, '{this is a new system designed so thst you dont have to tap the butt end in, instead you push it down and it clicks into place.] The problem with this system is once its pushed into place...