Search results

Well I took the covers off the transformer and proved with the input side that the multimeter is working after all. I put a new fuse into the output side of the transformer and now have 19v across the terminals (from a 12v transformer!). Happy days. Thanks everybody who helped.

You could be right! I'll try it on the back of a 240v faceplate later on and see what it reads. Having checked more closely I've discovered that the transformer does have a 1A fuse in it, according to its case, so potentially that blew when the wires brushed against each other. Also, the bulb...

Thank you Mr Bloomfield. Good plan.

Yeah, in an ideal world the transformer would be more accessible but I wasn't going to compromise the design of the new kitchen for things that should (theoretically) never be disturbed. Just need to remove the top box over the fridge/freezer to be able to take the lid off the transformer and...

Thanks all. Having read your replies I've cut the feed wire from the transformer (i.e. I've intercepted the feed from the transformer to the chime box within the hallway ceiling) to get back to clean metal straight from the source. Unfortunately my multimeter is still not detecting an AC...

I want to use the existing doorbell button wiring to power a camera doorbell, which needs 12v AC or more. The existing doorbell transformer is 12v, 1A. So far so good. There are four cores in the thin wire leading to the front door button: red, yellow, blue and black. The red and yellow are...

That's a clearer photo of the flush inlet. The Great Wall of Porcelain in there doesn't look like a mistake to me. It's part of the pan's design. If it were a mistake I'd expect the flush to be weak, and it isn't at all. The inlet had copious amounts of white silicone attached. (You can still...

Hi all. Thanks for all the replies. Yes, that wall of porcelain in the pan inlet means the water has to flow up higher to flush the toilet. Perhaps it means the pan is lower profile than normal or something. I don't know. But it flushes just fine so it does seem to be by design. My photo shows...

Thanks again. I'll clean out the pan hole and try that idea.

Thanks Andy. Appreciate your advice this evening

You're right - I need to take the pipe and cone out and have another look with my endoscope. The cistern has a bit of light limescale but nothing that would block the flush pipe. I have a funny feeling the pan was just designed this way. Given that even the new seal is leaking I guess the pan...

Sending photos of my toilet parts to strangers on the Internet on a Friday night. Are you lot the ones my mummy warned me about? ;-) Anyway... PXL_20201002_205601306 by SiliconS posted 2 Oct 2020 at 10:05 PM Looking down into the flush pipe: PXL_20201002_205630425 by SiliconS posted 2 Oct...

There's enough flex in the pan seal (flush cone?) that I can tip the pipe up and down quite a bit. Even with the open end high the water doesn't run out of the pipe into the pan.