Search results

The problem has always existed - we moved in about a year ago. The house is only 15 years old so I doubt any conversion has taken place. I think I need the controls wiring looked at by a professional

British Gas Model UP1

Drayton Mid Position MAI/679-3 I wired it up exactly as previously installed, however, there lies the problem I think. I can only currently turn the C/H and H/W on/off at the same time and the valve will only remain in the mix position. Does this mean water from the boiler circulates...

I replaced the entire valve and actuator - like for like. Thanks

I have bought a few TRVs to install, however, there seems to be a few issues:- 1) C/H pipe - The 15mm to 10mm adapter that comes with the valve will require cutting back the existing olive and possibly jointing a new piece of 10mm pipe on - should I just cut it back put a 15mm to 10mm...

Here is the problem:- 1) If programmer put to H/W only, I get H/W and C/H on full blast 2) If programmer put to C/H only I get nothing at all (boiler&pump are off) 3) Room Thermostat doesn't seem to control rad temps - always on full blast 4)Mid point valve always in mix position I have...