Search results

  1. B

    Replace Broken Switchmaster 300 to Control HW/CH Separately

    Yes, your diagram is spot on! I'll do as you suggest and stick with single channel operation for now. I've got money set aside for a new boiler but it seems a waste to change while this one is going so strong! Would this boiler be original to the house? 1980.
  2. B

    Replace Broken Switchmaster 300 to Control HW/CH Separately

    Sorry about 2 pics. There's a kitchen worktop in between and I couldnt get far enough back to get it all in 1. My kitchen is v small! Yes. It connects with a T peice. Those 2 pipes go down through the floorboards too. So would a 2 channel controller be appropriate, switching the boiler...
  3. B

    Replace Broken Switchmaster 300 to Control HW/CH Separately

    There's actually 3 water pipes coming off the boiler and a gas pipe. Boiler bottom right pipe enters second pic top far left, and furthest right of the boiler goes to the top of the red pump in the second one. The two pipes to the far right in the first pic are the same as the 1 in the...
  4. B

    Replace Broken Switchmaster 300 to Control HW/CH Separately

    The boiler is a Pottinger Flamingo 20 30, located downstairs on the wall of my kitchen. There is a cylinder in the airing cupboard upstairs, almost directly above the boiler. I'm pretty sure it hasn't got a thermostat. There are no motorized valves on the radiators. I had radiator...
  5. B

    Replace Broken Switchmaster 300 to Control HW/CH Separately

    Please excuse my lack of knowlegde about my own HW and CH system. Hopefully someone will be able to give me some answers though. I currently have a Switchmaster 300 timer. It switches on and off the HW and CH at the same time. All or nothing! This looks to be connected to two 13amp sockets...
Back
Top