Search results

Sat and watched the machine as it is doing my head in. The machine turns itself off, the power light goes off for approx 3-4 minutes every 10 minutes then comes back on, the machine then restarts itself,the machine is wired in properly what is the reason for this?

Anyone please?

It has only a cold water supply attached

We have a Zanussi ZDT6244 Integrated Dishwasher twhich is about 3year old,the past few nights it has took it nearly 180 minutes to complete the usual program(65oC). This program only usually takes 70-80 minutes max. There is nothing wrong with the cycle itself as all the dishes are clean and...

We have just came back from holidays with a pile of dirty clothes our Indesit WM12 washing machine's door is jammed closed with a wash in it. The handle is loose and floppy and will not open.I take it the hinge/lock is broken ? It is still under warranty but Indesit can not send anyone out...

I have a Creda Condenser dryer T622Cw it is heating ok but clothes not drying the drum appears not to be spinning. It made a strange clicking noise when turning one way for the past few days but now drum appears not to be turning.I take it is the belt has either came loose or broken. Sorted...

What do i check for? Loose wires? or ?

I have a Creda 'Simplicty' Condenser Dryer it has worked no problem until today, now every time you even move the timer button without even turning it on at the button the electric is tripping out i have searched through the posts but can only find posts on w/machines tripping out. Anyone anny...

Put the front up a bit 2 washes done and so far so good having said that it did not leak all the time so heres hoping

Have a Indesit WM 12X intergrated washing machine and it has started to leak from the powder/softener dispenser drawer at the front of the machine the drawer has been cleaned out and it still leaks water not much but enough to make a small puddle.The machine has recently been took out to remove...

Success :lol: ended up taking the heater off(it seemed easier than the sump hose due to the type of clip on it) it wasn't too bad, poked around then with a long screwdriver and hey presto out came the wire thanks for all your help Sleepyhead much appreciated

many thanks Sleepyhead will give it a go in the morning

What does the heater look like? where abouts in the machine is it? will have a go tomorrow as on nights

hi all we have a 2 year old Indesit WM12X intergrated washing machine which had been working fine until today. When the drum turns it is making a clicking noise or shoulds like something is rubbing aganist the drum,i took the machine out opened it up at the back and the noise seems to be...

Anyone

Just got a new kitched installed the dishwasher is an intregrated Hotpoint BFI 620 we noticed tha it was leaking at the front after a few days. We got the Hotpoint Technican to come out and have a look at it. After 4 calls the technican finally found a leak on the bottom of the door. I had...

I got a new bathroom fitted in the summer the radiator was moved and replaced so the system had to be emptied. Now the radiator in my dinning room only heats for about 5 days and then has to be bled. I have to take the bleed screw right out and it takes about 2 minutes before the air comes out...