Search results

Can anyone comment on the suitability and/or peformance record of the ScaleManager product please? http://www.scalemanager.co.uk I am looking at options to protect my new plumbing system which will be pressurised unvented. I do live in a hrad water area. Thank you in advance. cheers...

John, I noticed another problem yesterday. I ran the HW only but after heating the tank this then also ran the CH. So it appears that I have no control over the HW or CH other than to turn it in or off. Does this sound like a 3-port valve failure? The plummer is coming Friday so I can...

Thanks John, You are right, it only takes 20-30 minutes to heat the tank so not too bad. I am beginning to think the controller was not wired for that operation. I have someone coming to service the boiler soon so will ask them to take a look then. cheers and I hope someone else will...

Apologies for the delay, here you go: and the switchmaster manual: Thanks Neil

Do you know all in all I think your right, I will either look at adding a new socket or raised sockets that will allow me to run extension leads. Thank you, apologies for the madness but just trying to run through all the options before I move the tanks in place because once there they are...

Your right its not. Am I correct that extending the ringmain is required to be done buy someone qualified? I do not want to add more sockets onto the wall because it will look odd if I choose to sell the property. You are quite right I can use the extension leads although I have found...

Apologies, poor terminology! Yes, I meant running a spur from an FCU which is connected to the ring main or would I run power to the FCU as a spur? Either way, is this acceptable? Thanks for your support. Neil

Apologies if I misunderstand but is this true even if it is a spur off the ringmain? Thanks Neil

I would probably say that soldering is easier than compression joints, its a piece of cake, you could have a play with some gaf pipe and fittings for practice. Neil

Thank you for that link, I asked for a copy of the manual and one was sent the same day, I will post up pics soon so that others can have a copy if they ever need it. I also took some pics of the system last night to be posted soon. I adjusted the programmer last night to de-link the...

I was thinking of a flexible blanking plate outlet with the supply running to lots of sockets in my stand. cheers Neil

good question, I will check this evening. There is a central heating expension tank in the loft and a cold water tank that feeds the hot water tank. cheers Neil

Thanks very much, but ideally I need these to be individually switched and I could only use one tower (not enough) with wanting to keeping one side of the double socket free. Is the spur option sensible/safe? cheers Neil

Thanks chaps, I will check out the links, thanks. I guessed the basis of the on-off on-off and as you say a bit of trial and error is in order but it is always good to have the manual especially if you have to sell the house on etc etc. Currently it appears that I cannot run the central...

Does anyone have an instruction manual for a switchmaster 900 central heating/hotwater controller that they would not mind sharing? I have read other similar posts and I can work out the controls but an instruction manual is always useful and this is really what I am after. One problem I...

Thank you. This is not a new house (1980). Thank you for confirming that the loads are well within limits for the extension leads, however, I do not have enough plug sockets to accommodate the number of extension leads and other electrical components I require and I do not wish to add more...

Hi All, I have recently purchased a new house and am in the process of decorating before moving in. I have a large marine fish tank that requires a power supply to ~12 electrical devices, mad I know! Most of these are small power items 1-10W with the larger items being 150W metal halide...