Search results

Thanks for the Jeyes Fluid tip and couldn't care less about next door so that will be my next job tomorrow and if it works i might just manage a smile just to be polite as it came from there.

Might try the gun idea with my rat gun as traps haven't worked and it even went under a humane trap and pushed it up out of the way.Caddyshack springs to mind and i can do a good Bill Murry after a couple of slurps.

Any experts out there who know the best way to trap moles.

Measured the nozzle from the end of the blast tube and its bang on 43mm so i am happy knowing my calculated guess work was right and i can leave that part alone now.Just got to get pressure set and CO2 and my mate is having central heating fitted to his farm house very soon so i get him to send...

Must be me but all i can find are user manuals and they don't tell you much but thanks for the link.

Its an Inter B9 and i have the instructions but it doesn't tell you and i guess not the ones i need and its fitted to a Trianco Tro mk3 and i can't find anywhere to download the proper instructions unless anyone out there knows where?.

Can anybody tell me the gap between the nozzle and the difusser i think they call it as i think mine is to far forward and its still running ok though and i have tried it further back and still runs ok.

Tranny arrived first class this morning from ebay and brand new for £20. The old girl hasn't missed a beat since fitting it and the queer one is made up and off my back for now.I can now re-sell the control box once i recheck it works ok and the other stuff was that cheap there is no point and i...

More like keeping the number on the dole queue down i think and then we get on to why so many are going to Uni as they call it with no hope of a job at the end.

Sounds like i have opened a can of worms on the OFTEC training but that applies to any sort of training these days and you can't beat being taught by the old/us timers no matter what trade you are in and i guess i am lucky that anything short of sooting will do with my old boiler and i will get...

Thank you Oilman as you have confirmed my experience with oftec certified people and the last one i had here i had to tell him to leave as he was just fitting parts for fun as he didn't know what to change next and thats when i thought i can do that for a lot less money and sell them on later if...

I have found a sticker and it says Type INTER B 9 and also it has Bentone on it.Its neither black or orange its just cast alloy with all the bits bolted to it if that helps.Tried it again today and was fine for about an hour and then locked out when trying to fire up again, tried to reset it a...

Does EOGB make any sense as thats all i can find and thats on the control box?

I have wound the pressure up to get what i call a nice orange flame as it was yellow before and i know its very basic but not everyone can check pressures etc and we have to work of the hoof & i will check the electodes tomorrow & i would guess 4/5 mm & i have put them just in front on the jet...

Yep its a Danfoss EBI and i was thinking of fitting electrodes as well just to be safe and trying to get a heating engineer around here is nigh impossible if you could afford one & worth a few quid on maybe wasted parts to eliminate the culprit & i think i started at the cheap end & getting to...

Sorry for duff info but it will try to reset and then go to lock out again but stinks even more from the unburnt fuel until it has cooled down and then will restart and could run ok for hours and i have noticed if its windy outside that seems to make it worse.

My problem is not consistant and works fine when cold and then all of a sudden it wont fire up again when hot and goes into lock out and wont reset until the next day.Works on & off by using the water temp dial so that must be ok.Changed jet,solenoid valve,control box,photocell and next port of...