Search results

Many thanks....crimps it is then :D

Have an 8.5kw shower to replace, but the terminal block in the new shower is slightly further away from previous one, would I be able to join cable inside shower using crimps?. The cable is buried in wall and has no slack. By the way it is 6mm cable, many thanks, Rob

Thanks for the help....

Hi all, been fitting a stud wall today and used taper edge boards with the idea of filling the joints and decorating, now I have some fibreglass self adhesive scrim tape left over from a previous job, can I use this or have I got to use the paper type?? This is the tape ive got...

Ah, thanks for that :wink:

Going to be painting the outside front of our house(previously painted pebbledash), was thinking of giving it a coat of water seal, so should it be paint first, water seal after or vice versa. Many thanks, Rob.

there is usually a small grub screw on base of tap facing you, (unless tap has been fitted round wrong way) undo this and top swivel part should come off with O ring fitted on stub.

And then paint it again Ha Ha.

Wilkinsons has it on the shelf :wink:

Thats the way I would do it, quicker than drilling anyday :wink:

Tidy 8)

Right, update chaps..........Scraped all that black c***p off walls, sliced kingspan down to 1" spaced toward the inner edge, keeping it off the outer wall, fitted vapour barrier, then refitted plasterboards (thank god I screwed them on in first place and not had wall plastered) and all seems to...

painted on plaster, have scraped it all off :wink:

Thanks for the input chaps, I have removed insulation, put back plasterboards and wall still sweating, any ideas how to remove bitumen paint? :?

Hi, Im in the middle of a kitchen renovation project at home and I am having problems with the walls. Exterior walls are 9'' solid brick and I have black jacked them (bitumen paint) to stop any water ingress in them, fixed timber 50mmx50mm battens, infilled these with 50mm Kingspan and covered...