Search results

Many thanks for all the replies, following the advice I went with new PCB and its working fine now. Cheers all. Alex :)

Hi, My boiler basically has a problem where it fires up (somtimes), then cuts out. This is for both CH and HW. Sometimes the pump will come on, but it wont ignite. Other times nothing will happen. Often once it has cut out, it would "click", trying to come back on, usually unsuccessfully...

Ok, so I have taken the rad off and I have some questions. When i put a hose in the "in" hole (bottom left), water will quite easily run straight out of the "out" pipe (bottom right). Now, I took the bleed valve out of the top, and put the hose in there, and held the rad up and water ran...

It is indeed. And thanks for the advice re getting the rad off, Ill give it a go and report back. Any tips for cleaning the inside ?

Ok, Ill take the rad off the wall this weekend, and check both valves with the bucket, and give the rad a clean out as suggested, then report back. Couple of questions. If as the above poster suspects, its blocked so the water is just running down the connecting pipe at the bottom and back...

Sorry bud, dont know what you mean? :)

Hi, I think the isolation valves are ok. If it is a dodgy valve then it has to be the right hand side one, as the left hand side one i replaced from TRV to just normal tap one, to have 2 dogdy would be unlikely. Blockage wise, both valves get pretty hot. Maybe a block in the rad...

I have used the same 2 pipes that were going to the old radiator. The only difference is that I cut the pipes where they come out of the floor (in the corner of the room) and blocked them with isolation valves, then when I got the new rad, i connected it up with new pipes, but where those new...

Hi, I realise this is a common problem, but mine is slightly different to what I have read and I have tried most of what has been suggested. I have a radiator like this one: Except with more panels. But same design. It has only been fitted last year, but has never really got...