Search results

I have a 2001 Astra which I have owned for about a year, after inheriting it from my brother. Basically the problem is that when idling at e.g. traffic lights, the revs sometimes drop rapidly as if the car is about to stall (although it hasn't stalled yet), then bounce back up again. It will...

We had some very heavy rain the other day and water has penetrated into the house around the double glazing unit of our front window - at the bottom on both sides. This is very irritating as we have just decorated! Have been outside to inspect and the mortar around the window is very loose...

Thanks for all your help guys. In light of 'ban-all-sheds' earlier post about me reading the information a bit more carefully I have to say you were spot on, and I hadn't read it all properly. Plus, I am a first-time houseowner and as such probably used the wrong terminology when talking...

Right, I have got myself one Varilight Touch Intelligent Master and one Slave Switch Instructions are here: http://www.varilight.co.uk/Pages/pdf%20Touch%20Remote%20Dimmer.pdf I have used a multimeter to test the voltage from each terminal on both the current switches when the lights are...

Thanks for the link. One question: If I only have one dimmer switch and keep a rocker switch, does it matter which switch I use as the dimmer switch?? And presumably if it doesn't then I need a 'master' type dimmer?

Looks like a multimeter is on my Christmas list then... What do I need to test when I have one?

Thanks for the help. I have done a bit more searching and found this wiring diagram, which could be the set-up we have: http://www.diydata.com/planning/twowaylight/twoway.jpg If this is the case how should the master/slave dimmers be wired up/adapted?

There is only one cable coming into each box, so all wires connected to the terminals come from the same cable.

Hi Everyone, Just joined after failing to find an answer on google. We have a two-way switch circuit for the lights in our living room - they work fine. Both two-way switches have a red wire going to the 'COM' terminal, a yellow wire going to the L1 terminal and a blue wire going to the...