Search results

I know !! Bad question to ask thinking about it :wink: Cheers Paul.

Hi All, Our ususal plumber has recommended the Baxi Avanta as and upgrade for our ancient Ideal boiler, but my work colleague's son who is also in the trade would go with a similar sized W-Bosch. There's basically nothing in price difference but the Baxi has the longer warranty. Any...

Rocks, you are a god of these machines. Run a full cycle and all is well. Many thanks for your advice. I can now re-comission it back to the wife :D Cheers again. Paul.

on a test run now. time to clear up the tools and have a beer :D fingers crossed!!!

Right then, I hopefully think it's 'happy days' !!! I checked on a rinse cycle and was getting a 240 feed to the drain motor. As the motor was already out I plugged that in and it fired up on the floor so fingers crossed the problem is solved. I did take the multi plug off the board and give...

sorry rocks, just one more question. Will the controller error mode if I pull the connector off the motor and plug my meter in or do I have to have the motor in the circuit? My background is mobility products and as soon as you start creating open circuits the controllers will error...

so should I just put it on a drain cycle and see if any power kicks in at the pump terminals? Many thanks Paul. PS - why are you in the maldives, you'd make a killing over here with your knowledge :D

Thanks Rocks, Pulled the filter out and there was a pleasant surprise, 2 x £1 coins, a button and some plastic packing!!!!!!! I made an error with the motor. I just bought a new one but realised that my meter wouldn't beep out on continuity as there's about 160 ohms in the coil and both are...

Is that the rubber conical ribbed part? Thanks, Paul.

Update, no continuity on the pump terminals so I guess that's goosed!!! Looke easy enough to replace tho! Regards Paul.

Hi, Removed the white back cover and can't see any signs of a filter, just the small pump and a direct line into the plastic case. I've cleaned the terminals wil electrolube and will try again. Is there definately a filter on these things? Regards, Paul.

Nice one, cheers for the info. The wife says it's intermittent at the moment so hopefull it'll be poor connections as it's 3 years old. Regards, Paul.

Hi, Our machine has started to display the F11 code which would indicate that the filter would need a check. I've taken off the bottom front cover and where the user manual says the filter should be is a red cover with a warning logo on. Any ideas anyone?? Regards, Paul.

Cheers Andy, Managed to drain off about half the system tonight before having to refill and turn the heat back on. Will hopefully drop the system on the weekend and add inhibitor. Paul.

xmas and young family and cold weather so i had to take a day off work to drop the system so the heating could go off. I'll get to it straight away. Cheers

Hi All, Just as in the title. I've run the X800 through the system but it has been in there for a few weeks now. Recently the new Grundfos 15/60 has started to stick so to speak. All I need to do to get it running is flick it up to 3 for a second then back down to 2. This is bit of a pain as...

Will have to try tomorrow now as I've got an early start in the morning. Many thanks for the suggestion, will post back with results. Regards Paul

Will have to try tomorrow now as I've got an early start in the morning. Many thanks for the suggestion, will post back with results. Regards Paul

Dead as a dodo still !!! I unplugged all drives from mobo (HDD and DVDs) and put the graphics card back in and cmos battery but still no joy. I held in the on button for 30 secs as I read that this can drain off faulty capacitors and possibly boot the system up also. Bugger eh!!! Paul.

Hi again, Many thanks for your time by the way :0) The fan on the PSU is not even running. I've taken out the graphics card and just dropped the cmos battery which is giving 3+v on the meter but I've left it out to see if it can help matters. I'll drop the graphics card back in and unplug all...