Search results

I have had the same problem with my Rexon SM2151Al, its just 18mts old, only been used a few times and just stopped working when used being used. Contacted Rexon spares, who talked me through faultfinding to locaize the fault at the field winding, which had become open circuit. They...

I have recently layed a 100mm concrete slab for living room floor and wish to lay a wooden laminate floor over it, but when is it cured (dried out) enough to put the laminate floor down? To soon and I feel I will be preventing the slab from dry out because of the slab dpm and the laminate...

Cheers JPR thanks for the tip, I will certainly use this technique if (i mean when) the pimple/blister problem next occurs. Do you know the reason and what cause this in the first place?

HI trowelmonkey1 I scimmed onto old plaster, I gave it two coats of pva, one left to dry the other tacky. The walls I previously finished did not have these pimples / blisters, these were also old plaster walls.. sorry for my ignorance but not sure what you mean wait till it pull right in...

hi guys Hope you can advise with my problem I'm a novice to this muck spreading, I've recently scimmed a couple of bedrooms which came out ok. The recent wall i scimmed had what resembled pimples in patches over the wall. I cannot recall doing anything different from the rooms I finish...

Hi Guys I'm rewiring my property and not sure whether the smoke detectors should be wired to a regularly used lighting circuit or wired to a dedicated circuit via an rccb. also in the cloakroom I have placed a fcu in the room to supply a macarator, is this an accepted practise as there is no...