Search results

As suggested by Lectrician I did wonder if something in the switching and timing circuit might be the thing causing the bother. So today I wired a switch between a link from live and 3 ( switched live. Started the thing with switch off and circuit live. After a pause of no more than a second it...

Hi thanks for that , I do have a simple DC circuit tester ( 9v type) and did wonder if this was the case. After the second failure I tested the fuse in the plug, and then the connection by placing one probe on the plug pin live and the other on the securing screw of L2 ... this showed as a...

sorry no volt meter ........., did start a new thread as well (belt & braces). Is the idea of how I wired this up OK ? just to run it ?

Tried bench testing two Lineo 100 T VO fans, wanted to hear them run for noise and pressure test pre fitting. connected via plug and flex on desktop by wiring Live to L2 Neutral to N1 then bridging the live ( L2) to 3 ( switched live) and 4 ( full speed run ) Plugged this setup in and...

Tried bench testing two Lineo 100 T VO fans, wanted to hear them run for noise and pressure test pre fitting. connected via plug and flex on desktop by wiring Live to L2 Neutral to N1 then bridging the live ( L2) to 3 ( switched live) and 4 ( full speed run ) Plugged this setup in and...