Search results

Sorry, it was 5 years ago and I can't remember the details now, but I don't think the gear position matters - as it rotates it directs water first to one spraybar for about 50 seconds, then the other for the same time, then just repeats so I don't think it matters where it starts from. Could be...

Total cost was 99 for the part plus 65 engineer's charge plus VAT, just under 200 but still cheaper than a new machine and it's working fine now. I would certainly replace it myself next time although it's quite a big job. Mine is a built-in, so the work may be slightly different on a...

The service engineer was right - the motorised valve in the heater unit, which reduces or shuts off the flow to one or other spraybar (why?) was faulty. The gear which drives the shutter valve disc was corroded and the end of its shaft had broken off, so that the disc stopped in a position...

Dishwasher parts

Thanks, good advice. Yesterday a service engineer looked at the machine, doesn't think the pump is faulty, suspects the heater unit shutter valve - but it sprays from both arms! Will check the pressure vessel pipe and let you know the result.

This dishwasher is 7 years old and 2 months ago started leaving dishes dirty because the lower spraybar was not rotating when the circulating pump was operating. I cleaned filters, checked the drain pump was clear, checked the water passages to the spraybars were clear and not leaking, checked...