Search results

how do you carry out a spillage test on a wood burning stove? Do you just warm the flue up, bung a smoke bomb in, shut the door and check no smoke escapes from the applaince and flue system? Many thanks

how do you carry out a spillage test on a wood burning stove? Do you just warm the flue up, bung a smoke bomb in, shut the door and check no smoke escapes from the applaince and flue system? Many thanks

I am thinking of installing a wood burning stove in my house and wondered if anyone could give me some advice on how to install it please. I was planning on dropping a 6" twin wall flexible flue down and backfilling with vermiculite. My Stove is 6" flue outlet so vitreous enamel from there with...

put some pics in my images for you to see. its been raining here now for 36 hours and no sign of water through the roof. Really confused , think it maybe condensation cos since i took down celotex from between joist there has not been so much as a drip of water. What is weird though is there is...

pics from above and side of fibre glass roof

have you got any radiators or is it all under floor? could be an air lock? what is the system pressure at?

Thanks for your post alittlerepect and you are right a warm roof was not possible due to restricted head height in the loft room which is why the celotex is going between the joists of the roof and not sandwiched ontop of the joists. A vapour barrier however I have only just heard of in your...

Changed board today and all sorted. Never come across that fault before but will remember it now. Change the board if you haven't already. Good luck

Sorry Tuck haven't had a chance to take photos in the light yet but tomorrow mill do. My flat roof is on a loft conversion dormer that I have built and the flat roof actually runs pretty much level with the ridge bean of the existing roof. There is no turned up matt at this point so that maybe...

i am a plumber but not familiar with the system you have. But is there a room thermostat for the under floor and can you see a pump any where. Try spinning the pump it may be seized.

Thanks Tuck your a star but don't want to inconvenience you but thanks again! I glued the trims down with grip fill and nailed them with 50mm galv nails. I actually ran the matt up and completely over the edge trims and at the front over so it is about 2 inch from touching the gutter. At the...