Search results

Is the pressure reading at the meter done when the fire is running and other appliances off as I take it this will give me the true value of the drop from meter to fire at working pressure. Hope that makes sense, the engineer did say he tested at the meter so will have the value somewhere but...

Thanks all for your input, Just to clear things up testing the working pressure at the fire when it is on as well as the cooker and boiler running it drops to 19, have double checked with the qualified installer and all is fine, was just worrying that I wasn't getting 20 at the fire (which...

Thanks for the replies. Reading at the meter was just over 20 mbar with all the appliances on so all good there I was told. The fire seems to operate fine and was installed by the correct people just wanted to double check.

Hi Just had a new gas fire fitted and the working pressure was recorded at 20mbar at the fire with it running on full which is what the manufacture requires but this was with all the other appliances off e.g boiler and cooker. When the boiler was turned on it dropped to just under...

Thanks Richard for your time and effort, really appreciate it. With regards to the B/Flue all falls with the correct regulations and so does the gas fittings. I have been in touch with the fire company that sold me the fire and they say they use Fermacell on their installs so i then...

The fire is a balanced flue Gazco Studio 2. Here is a pic of how to install the fire from the instructions which i have followed: And here is a picture of what i have done: The fire is only resting in place and will be installed (plumbed in as i called it) to all the correct...

Thanks for the info If i use the supalux will timber supports be ok if they are kept to the correct distance stated inside the fire manual? Also will the Vitcas plaster go straight onto supalux, i have read on the vitcas site that it can go straight onto mineral board, is this the same...

Hi I have justed had a hole in the wall fire installed into a false / bulit out chimey breast and it has been boarded with fireline board. I am now looking to plaster the board and was wondering if anyone had done this before and what they have used. I have seen Vitcas and a few others do...