Search results

Its the fact that the fence is moving closer to the highway that has me asking questions. We've already got a low hedge at the front of the property that's a pain to maintain, a 6ft one would drive us insane :p This is one of my biggest worries about it. I can't seem to find a deffinate...

At the moment I have a massive front garden and a smaller side garden separated by a 2m high fence. What I want to do to move the current fence closer to my front boundary so the side garden gets bigger. Like this: The fence will be kept at least 2m away from the pavement so I should be...

So you don't think we'll need the heat resistant plaster? Either way I'll mention it to our plasterer. It'll all be installed by a gas safe registered person. I just want to make sure it's done so that I can get a better finish on the floor.

It's gonna be a gas fireplace so it'll get very hot. Would it just be the front face that'll need to be fire resistant plaster or would the sides need to be the same way?

It's made from marble, I'd guess it's solid? We've not taken delivery of it so I can't check. It's this one here

Only a tiny bit will be under so condensation hopefully wont be a problem. It's all going on a standard floorboards anyway. I'll look into some dpm just to be sure so thanks for the tip. Just found out the surround screws in on the inside so we'll defiantly plaster first. Any more comments...

hi, we are currently renovating our lounge, and we are a bit confused about how to proceed... we are putting in a marble fireplace surround, do we need to put it in before or after plastering? Can we raise the hearth using concrete underneath so that when we lay our engineered wooden...

Hi all, Im currently in the process of getting quotes for some french doors and I'm unsure what he real life difference is between fusion welded and mechanically fixed doors. Is there much difference is quality?

Thanks for the reply. We've had the expansion vessel changed a few weeks back so it should be fine but I'll get someone to double check. Any other ideas?

I'm having weird problems with the above boiler. In short whenever it's used water starts draining from the pressure relief valve until i's gets to about 0.6 bar. However the actual pressure never even goes above 2 bar (the valve being rated at 3 bar). Some random things I've found through...