Search results

Hi All, I need to find out whats going on with this boiler, Whats happening is when you switch the boiler on, it fires up for no more than 5-10 secs then cuts out, it will repeat this process for hours on end. If anyone can help, here is the details of what ive found

Im trying to find out which this shower is as it needs to be replaced? Any suggestions? I think ive narrowed it down to 2 Aqualisa Aquarian or Aqualisa Opto

Ideally you shouldn't have your heating or hot water on if its not working properly. Leave heating off. Increase pressure in system to about 1.5bar. Vent radiator starting with lowest. If pressure goes return to vessel and increase again. Vent all rads until full. Maintain pressure of around...

Is the handle hard to move? Most common problem on thermostatic showers is the cartridge seizes up. If you can remove cartridge, i would use the aid of someone to turn water on quickly to see if anything comes through. If yes then you need a new cartridge. Can you get any details on the shower...

you should be able to buy some sort of facia pack. try looking for easy plumb facia packs, as these are basically shower trays on legs. So they have a facia to cover these.

I take it you have a pressurised system. You should look for a filling look, this will contain some sort of slotted screw or small handle (like a washing machine tap) that you can increase the pressure. Also should have a pressure dial fitted nearby to gauge pressure. Could be by the megaflow...

DIY + Unvented Hot Water Cylinder = BOOM!

Not a landlord. Its for a property that my partners auntie has just brought to rent out and im doing bits and pieces. As for the model number the cooker itself isn't in great condition and i cannot find any model number

Hi all, I was wondering if anyone knew any details on this cooker as i cannot find any on the appliance itself. All i need to know is if i can get a replacement knob? Any help?

Thanks for the help. So its a 'thorn apollo' boiler then? Just to clarify

Hi all, i have been sent to look at a boiler in a small workshop to change the gas valve. But i cannot make out anything on the boiler //media.diynot.com/164000_163998_33157_26196629_thumb.jpg That is the link to the pic of the boiler. Any help from an experienced engineer...