Search results

My brother in law gave me a Calor gas (13kg) Patio gas bottle (green canister) recently and I am not sure if it's a different type of regulator fitting than I am used to (my current bbq uses a snap on system) and i think this bottle may be a POL fitting or it's a damaged valve/connector. The...

gqs bottle

Thanks guys, the wiki's, the diagrams, links and replies were so helpful and I have installed the lights and it all works. Thanks again.

Just to clarify, when you say 'additional', do you mean in addition to the cable i have already ran from the switch to the light, i.e 2 cables from wall switch to JB 1 cable from JB to wall light 1 cable from power source (ceiling rose)

Great i will give it a go, thanks very much for your help and the diagrams/links

Thanks for the reply and the links. I think I am a little clearer, So if I run a cable from a pre existing light, such as the nearest ceiling light to the new wall lights (thus now having 2 cables present), one will be the switch and one will be the supply/lighting circuit/loop. I can...

I have 2 wires both red so not sure if they are both live or neutral etc. When you say run a cable from existing light to new light, could you elaborate a little more as this won’t be too much of a problem as i could do that in the loft, as long as i don’t have to run another cable to the...

Sorry I am a newbie so please be gentle. I have an existing 1 gang switch to a ceiling rose light in the bedroom and I would like to add a wall light. I have changed the 1 gang switch to a 2 gang switch and run the cable from the new wall light back to the switch but I am unsure how to wire...

I have 2 ceiling lights (40w SES) that I want to put in our bedroom. I have a 2 gang switch already fitted (only 1 gang currently wired up). I looked in the shed to find some cable to use and I have run out of T&E, can I use 4 core PVC flex (3184YH 0.75mm) for a lighting circuit?