Search results

Im guessing that means no faith in BG lol? my dodgy paint drawing of what im going to do :D

Thanks for your help guys, all I needed to know is that it can be done the way I suggested, means I don't look an idiot. Lol. Boss is adamant that it was hot at time of fitting thou, and apparently the lad that fitted it is ex British gas...Least I know it can be done! Will T the 22mm pipe run...

That's never gonna happen, the pipes are buried in the wall. there isnt a TRV, is jsut standard valves. I've advised the boss that the pipe work needs to be changed up stairs. It's between him and the customer now. Just not sure about running a conventional 2 pipe system upstairs and a single...

That was my thinking but I haven't come across a lot of single pipe systems. So wasn't 100% sure. Thank you

So my boss telling me the rad was red hot after one of his other installers fitted the rad, is a crock of ****e then.

Had a night mare of a day trying to get a new rad on a single pipe system working, 5 bed, 3 bath, 4 reception room house. all run on single pipe system with a ferroli 32 boiler. New rad (1.7kw) apparently worked when installed now doesn't, has been fed from upstairs. which I thought was a bad...

Wasnt quite sure where this went. Recently had my flat garage roof replaced, all timbers everything. started using the garage as a workshop, and winter coming its starting to get cold in there! I could plumb in a radiator, but my thoughts are the heat would be lost through the flat roof...

least it's one done! have 4 more and an intermediate to do!

under stairs light at a guess?

Scrap that, just been told by my mate what ive done is right(the egg pic), he doesn't know why its not working, so hes gonna bring his tester round tomorrow :D Update, doesnt make any sense but still; it is now working, disconnected everything at the main switch, reconnected em all. and now...

its the same 3C&E in one box as in the other, and they are brand new switches. really confused now :( is it worth trying cockneykids diagram?

ill look again later i said that to a m8 of mine when i was drawing it XD still not got hold of my sparky mate, how dare he be on holiday when i need to sort summit lol AndyPRK Theres a lot, to say the least each switch is a 3g with virtually all of them being 2wayed, but this one...

dodgy drawing of how ive wired it lights dont come on at all when wired to the switches. if i wire it "normally" then the switch works, its when i try to add the second switch that they wont come on.

wiring

If I connect the lights straight to the feed they work

must be another issue some where:/ have COM to COM L1 to L1 L2 to L2 The feed live to L1 The light live to L2 doesn't work

thanks, i shall try that later!

before anyone says read the sticky, i have :) :P not new to electrics so this is somewhat confusing me, basically have a new build extension with lots of spot lights everywhere, myself and a mate are doing the electrics (hes a qualified sparky, im on a course to become one) anyway, all...