Search results

DetlefSchmitz Thought so, but was ever hopeful. Can move on. Thanks for the rapid answer.

Bought a Landis E110 digital meter, thought it was zeroed, but not so, when it came. Is it possible to zero it in house? Or needs specialist kit? Thanks.

Same not changed, honeywell cm707. What you thinking - it's still on old learning?

14 rads total, but a bit of zoning going on. Have I had it that long, ;-) The boiler came out of its box last month, but I have had it a while waiting for a long stalled extension to be finished.. The boiler can be range rated, worth reigning it in for a trial?

Greenspring CWi47 water heater And to pre-empt your next question, No it is not starving it of gas. Meter upgrade, and turned it off in case it was the culprit. No difference. If I could ask, my interpretation of modulation is full tilt and then reduce to conditions, ie. flow and temperature...

Hello terryplumb Yes all rads get hot, it is just the slow start, or should I say slower start than the inefficient Baxi And yes it only heats the rads. Water is totally separate.

Hello New boiler fitted Flexicom SX30 system boiler only heating radiators, (replaces a Baxi 105E combi). Everything works no fault codes, no lock out. The water temperature is set to 80C and max power is set to 30KW, from a cold start the temperature gauge rises slowly and after about 4/5...

Hi Tony The parts were changed as they failed, (and not in an attempt to solve the problem) that is the pcb failed first, then within days a leak developed on the 3 way valve. The sensors and thermostat were changed ad hoc, but at £12 worth of bits, seemed sensible. If its the fan or flue...

Hello, my Baxi 105E has a problem with the hot water side. From cold, I turn on the hot tap and everthing works as it should. But if the water has been on, and say lights 70 or 80 are lit, then when the hot tap is turned on everything starts, call light -fan- pump but the burner does not...