Search results

I went into menu 56, went to telecoms and then changed the values to those described, I do think I pressed, ESC, will check again when I am there tomorrow. When you say power down the whole system? Do you mean kill the mains and remove the battery? Would that not lose all the settings on the...

Alarm, I made the changes requested but the panel still seems to state failure on line fail even though its set to NO, and ARC Comms Fail. Yale, the panel is not specific to ADT so I dont see what the problem is with Alarm providing me with the information I need? Besides, as far as I know...

Thanks, I will give that a try, I assumed it was under the 56, telecoms and then parameters. Will change the settings to what you have outlined, hopefully this should fix the issues we are having. Thanks again, really appreciate your help and advice.

Yes, I have connected the RF receiver and the detectors and programmed the zones for each of the detectors, even setup the door contact and enabled the final entry/exit zones and they all work as expected. The Keyfobs have also been programmed and setup and these also work alongside the pin...

As this unit has been installed I doubt they would take it back. Is it possible to disable the ARC Comms Fail? If not I suppose we could purchase a monitoring contract with an ARC and see if they would allow us to link to them maybe? Alternatively, if we are told that we cannot return the...

There was a number of reasons for choosing the alarm, ideally I do not want it connected to an ARC and I do not want police response on the alarm either. All I wanted was for it to call when a break-in is detected, if this is not possible without connecting to an ARC how can I at least disable...

We have had some of these installed at our office and home by ADT, but they wanted to much money for my brothers home so we thought we would purchase the unit and install it ourselves. If it wont call and tell me there has been a break in like our ADT one does how do I go about disabling the ARC...

Hi, I have recently installed a Galaxy G2-20 RF based alarm system which seems to be working fine except two issues. Once the telephone line was connected the box keeps failing with ARC Comms fail. I have no idea how to switch this off as I do not intend to use an Alarm Receiving Centre, I...