Sink basin H + C to C.H. towel rail flow + Return to pan C.W. to Bidet C.W. + H.W to Electric shower 15 mm dia C.W. supply to Bathroom circuit wiring, (NOT direct to Consumer unit) Mira shower connection is pre-wired to 15mm attachment that connects to C.W 15mm dia supply. (16mm, required to...
I want to connect 6mm Earthwire from a bathroom into one of the bathroom power circuits as it must not be taken back to a Consumer board.
I have a 20 amp junction box # with cables fitted for the bathroom and the 6mm is too large to fit into the Earth terminal in that box.
Is it acceptable to...
A - So Supplimentary earth wires only connect metalwork in a bathroom connected to say metal pipework without any termination into say any junction boxes as all other electrical equipment like shaver sockets, light fittings, electrical towel rails each are earthed via their own usually flat grey...
The electric shower will be earthed to the cold water pipe and the 16mm shower grey twin and earth taken back directly to the consumer board with its own 30ma breaker when the new one is installed.
The basin, pan, bidet H & C water as fitted as required to each and C.H & radiator copper pipes...
Ans YES
Closest place to connect earth wire is under studded partition wall and next door under the landing floor into a 4 way earth block i.e. 3 earths into one side, one earth out into a junction box and not to the consumer unit. bonding of pipes and metal work only.
Can an Earth wire block (4 way) be screwed directly to the side of a first floor joist under the floor boards or does it need to be first placed in a protective box.
A Gas Combination Central heating and hot water boiler.
Working well for years, then stops.
Serviced then worked again.
A few days later, stopped.
Replaced several parts and it started again.
Ran for a few days later, stopped.
All systems working OK up to point of continuous combustion of gas...
boiler combustion
boiler failed
boiler ignition
boiler problems
boiler stops working
gas valve broken
gas valve failed
gas valve problem
gas valve stuck
Just a general thank you to all and I mean all who have replied to some of my; in some cases strange requests, A Very Merry Christmas and Happy New Year.
B
Upon investigation of the jammed original button, it had broken internally so investigation ensued, a new button was then opened up to see exactly the layout and connections inside, so comparing the two products that had the same internal components it was then easy to identify how the button...
Thank you Dan that's something I never thought of, upside down doesn't go round, I would never have thought of that in a thousand years, it's wonderful to know there are intelligent people out there who are forever happy to advise less intelligent peoples like myself, I am forever in your debt...
Bosch still have not yet replied, the product arrived in a sealed plastic bag with no wiring instructions.
I've solved this problem and the button is working.
Have you fitted Honeywell Gas Control units, have you had any concerns with performance and/or manufacture have you had ones that were new and did not work.
Bosch component, one interesting comment on the net stated that some manufacturess decide to annotate their own products with their own icons and identification; much to the annoyance of people like me, so after careful consideration I decided to inspect the wiring inside, then fitted an...