Search results

I RESEMBLE THAT REMARK :)

It uses 12 v. 24 ah.agm. or gel lead acid battry[cyclic]

thanks for english leson

should have put my mate asked me look at his electric golf catr only runs on full speed the 5m=5mtrs.10m=10mtrs.25m=25mtrs.run on thre buttons the control pot is ok 0-190.ohm for normal opperation dont know the make no badge or logo :( is it p.c.b.control card ?

I have been asked to look at a mates golf troly [electric] only runs on full speed it has 5m 10m 25m buttons hand control pot pot checkes out 0-190homes ok any ideas please :(

Correct retired at 67 when mi corgi finished now 76. this is my boiler got it as end of line from my frends at Plumb centre. big golfers discount :D I have fitted new reliefe valv on discharge pipe temp to chedk ok.up to now changing it out when servicing it in spring . going to check...

Thanks Tony but not 15 yrs .Iaint that old but I was one of the last to do it no way was I taking the closed book n a x or sumat and it only hunts when the pressure drops I am fitting a new relievf val :?

its not a flame prob. its low water pressure I am A.C.O.P. engineer used to working with multy fuel high temp and pressure I know service engineers change out parts untill they get it right I can work on domesticks if its on industrial sites least i did when i was working. :D

Ideal c28 my point is not ignition fault its low pressure fault caused by safty valve passing thanks :D

am I dreaming or is tool like a sealant gun to fill with motar available instead of pointing trowel this would take the erk out of work :?

combi locking out intermitent fault flame hunting then locks out presure gage showing 1.1 bar actual pressure in system at lowest rad .5 bar adjust to 2 bar at boiler ok .relief valve opens at 3.5 bar at boiler :?