Search results

Currently have a 4.0mm T&E dedicated spur for the oven, the cable terminates in a 45a double cooker socket - the cooker switch goes no where. At the moment limited to a cooker on a 13amp socket, so if I wanted to get a higher wattage cooker would need to do some tile removal and chasing and add...

Looking at getting a Texecom Premier 48 with wireless expander , but also have a RF stat (a Honeywell ST9420C programmer with a Honeywell stat DT92E which communicates via 868mhz ). Has anybody come across any interference issues between the two?

In the kitchen I have undercabinets links lights, these are supplied from a 20A radial RCBO protected circuit. 2.5 T&E comes off the radial to a 3A MK FCU. The FCU is screwed upside down under a cabinet and used as a light switch, the cable is clipped to the underside of the cabinets. Is...

Currently getting quotes to upgrade our old fusebox to a 10/12 way RCBO consumer unit. Getting different advice regarding some earth issues, and wanted to check. With the earth bonding inside our house we have three earth wires from the bathroom, that go into a earth connector block, one...

It is still allowed to extend the ring using junction boxes that will be surfaced mounted? In the kitchen I have a couple of pantry rooms, in one a double socket has been spurred off from the ring using a junction box, this socket then has another double socket spurred from it. The other...

Hi, Have a problem with the conventional boiler on S-Plan with 2 zone valves. The HW is not firing when requested on the programmer. Opened up the junction box and all came clear, its a mess, instead of using the 2 way valves switches, the live from the CH programmer has been wired to switch...