Search results

Thank you so much Lucid. It will take me a while to read and understand everything you have mentioned but as soon as I get a Laptop, I will have a go. As soon as I do, I will tackle the PC Monitor as you have suggested but nevertheless when I do I will, out of courtesy to you, let you know...

Many thanks both of you for replying and in response to Tigercubrider - point taken! However, with regard to Lucid's reply it would seem there is little likelihood of my being able to watch tv on my PC but nevertheless I will respond as follows:- 1. I do have a freeview Humax box with an HDMI...

My 22" PC monitor only has one VGA slot and a Power connection - no HDMI slot. If I use a "VGA to HDMI" conversion unit and connect an HDMI cable to my TV, will I be able to watch TV ? As far as sound is concerned I have wireless headphones and will be able to hear ok.

Yes it has 82. Many thanks for your input :D

That's ok Mursal. I'm only too glad you gave your opinion as it confirms that I should charge the battery for around 3 hours. Thank you all for your help

Many thanks Mursal but unless I am mistaken, 82 said "multiply" the 1 Ah by 0.4. Needless to say, I am a bit confused and am wondering if you are able to confirm which of you is correct ie divide by or multiply

Once again thank you 82. The battery has 1.0 Ah on it, so according to your calcs this should charge the battery in less than one half hour ie 1 times 0.4. Does this sound right to you? PS Sorry about the delay in getting back on this but I was away yesterday

Many thanks 82.. The information on the charger is:- MNCD24-3KA-H BHY48 - 28BS 28V DC (solid line above 3 dashes ) 400mA Does any of that give you an indication of its AHr ?

Many thanks Woody. I thought the charge time was about 3 hours but I wasn't sure and as you have more or less confirmed that, I'll take it as read. :D

I have a 24 volt DC NUTOOL drill but have no battery charging information. The charger reads - 28V DC --- 400mA. My question is :- Approx. how long should I charge the (Nicad)battery to bring it up to 24 volts. Any advice would be much appreciated.

Many thanks for all four replies. As the trolley manufacturer supplied the charger with the battery, I assume 3amp is sufficient and will continue as before. Thanks all. Bernie :D

Many thanks for your replies. To answer Big All, the manufacturers date is April 2012 and I first used it in June. In reply to Mursal, I use a trickle charger (3amp) and from your answer I assume the voltage should read approx 14.5/7 when fully charged and not 13.7 which it is currently...

I have a 12 volt lead acid battery which I use on my golf trolley. On the side of the battery it states :Standby use 13.5 - 13.8 (20 degrees) and cycle use 14.4 - 14.9 (20 degrees). When in cyclic use and I charge the battery my charger light indicates the battery is fully charged but...

Many thanks John. I have Halfords and Maplins nearby and will see what cleaners they have. Thanks for the tip. :D

I am having intermittent problems with the contacts in a wiring connector in the engine bay of my Clio which are difficult to get at to clean. However, they are just accessible enough for me to spray the contacts inside the connector and I am wondering if it would help to use say, WD40 on the...