Search results

  1. A

    Roofing tiles

    Thanks for the advice. Would you consider this a big job? My roof is about 20m and I probably need both sides doing. Is it as simple as removing the tiles and replacing the wood?
  2. A

    Roofing tiles

    Thanks, I am more looking to lift them off and replace the wood...
  3. A

    Roofing tiles

    Hi. Sorry for the delay. I have pics now.
  4. A

    Roofing tiles

    I have a barn conversion and the bottom row of roof tiles sits on a wooden beam where it joins the wall. Basically there is a timber that sits on top of the brick and the tiles overlap it at the bottom row. This timber is now rotten and needs to be replaced. Is it just a case of taking the last...
  5. A

    Sink waste fitting question

    Hi Guys I have just had a new worktop fitted in my utility room and we have a waste pipe coming in to the cupboard, which is a 40mm pipe but has not thread so looks like it is a coupling type connector. I can find no combination of parts which will allow me to connect my sink waste trap to this...
  6. A

    Fire surround

    Well, at the time I did not know what surround I wanted so I figured it would be reasonably safe since there should only be either a 1 inch or 3 inch rebates. Little did I know... Well, thanks for the constructive response though, it really helps...
  7. A

    Fire surround

    I have had a granite back panel and hearth fitted and the front of the back panel is exactly 3 inches from the wall. Just bought a surround and went to fit it and there is a gap of around 1.3 inches between the surround and the panel. I though surrounds were either 1 inch or 3 inches!! If I...
  8. A

    Biasi Boiler Issues

    HI Thanks for the reply. No idea where the drain is so will try and get in touch with British Gas. I have just taken out their home care policy so this is a good time for me to call them I reckon...
  9. A

    Biasi Boiler Issues

    Hi I have a Biasi Boiler (not sure which model as there are no numbers on the front and no info). When I turn on the ch, it goes off after a min or so with the error showing as "Lack of burner ignition". When I push the button on the front, it comes back to life and the flame lights but it...
Back
Top