Search results

He was an independent, it's my old folks fire. Condemned and advised operate at owners risk. The written notes stated-ish 'suspected water valve, unable to access flue to inspect' but then the next line stated 'iso valve inspected, no leaks'...well that suspect water valve is the iso. I'm just...

He said he couldn't remove it...I'm assuming it's just sealant and it's par the course for an engineer. Remove/refit reseal? I understand what he's saying about the tap, but surely a previous engineer would have snagged it....and surely a British gas engineer wouldn't be using gash iso valves...

Registered gas fitter serviced and condemned our fire place, citing the he can't remove the closure panel and hence can't test the flue. Is it his job to remove and reseal it for the service, the fires been in over 20 years and no other engineers ever said anything. He also stated the...

Hit a nerve there I think! Happy Days, adios chumpo

Again- much appreciated for the help lectrician and all others. The photo with the wires in, were installed as per instructions from 'ban all sheds'. Absolutely nothing happened with this set up. And once again to 'ban all sheds' get a life, you sad patronising chump. Your no help, just...

Sorted! The diagram from Lectrician does it, I had the mains live in the common. I'll try and understand were I was going wrong now. Lectrician many thanks, Securespark and the others too. Massively appreciated

Thanks to all the other guy's for your help. I'll try to explain a bit better : The 2 wires upper left blue and red are direct to the fitting of the landing light, they had used 3 core but the yellow is chocked at both ends- this is the yellow chocked and wrapped with green tape at the...

Afternoon, A quick one first.....'Ban all sheds' I haven't once claimed to be a sparky, merely asking for help and a bit of wisdom to understand were I am going wrong. I'm not on here to be patronized by some 'wish they were the nasty school teacher'. Your not on here to help, only to...

I've locked the wires in as you said ; The bathroom light neutral is chocked with the green tab The 240 live is in the common for the bathroom switch and linked to the 2nd common The yellow with the green tab from the bathroom is in the L1 switch On the 2nd gang for the landing light...

Hi Bosswhite. No I have definitely established the right wires, I lit a circuit with solely the bathroom light to ensure they were correct. The upper left are the landing light as I pulled them from the loft thru the conduit to ensure.

We have been renovating my hse for the past 18 months, I have mixed the wires. The red is the live, I have checked with a multi it reads 240volt. The blue connects to the upper blue black and red to the live ring as I have been into the loft and checked the full routing to the bathroom...

Hello all! I need some wiring wisdom for my landing/bathroom light switches. The wiring has been confused....I can get each of the switches to work the lights, but when all looks good the hall switch will not turn off the landing light......tis driving me mad! Below is the picture of...

Landing wiring