Search results

It appears to be working now and there are 3 pipes attached to the mid position valve. Hopefully this has fixed the issue. Thank you for your help

Ahhh right. I just set it to what I was told by the person on the Hive helpline. They asked if I had a tank in the loft that fed the hot water tank and when I said yes they said it needed to be put in gravity mode. So I have a fully pumped open vented system (a loft tank for heating and a loft...

It’s gravity HW and pump central heating. Got a tank in the loft feeding the hot water tank and a feed an expansion tank for the central heating

It does come from the wiring control centre. The live to the pump comes from the call to the tank stat. When I select heating in the hive app both the heating and hot water comes on (person on hive helpline said this is correct) due to it being gravity fed. It can’t be the wiring as everything...

It’s a Drayton MA1. This was replaced in January. I mean it could have failed after 6 months. Would this not working properly cause the pump to not kick in?

So my system is as follows. Gravity fed system with 3 port valve and tank stat. The circulation pump live is wired through the tank stat. We have a dual Chanel Hive stat. When it calls for heating is lights up for both heating and hot water (this is to run the pump?). Hive has had gravity mode...

Yeah I thought that sempatap may be too good to be true sounding. I wasn't aware of the grants that were going to be available so I will look into those. Thanks for your help people.

Hi all, Really wanting a bit of advice from anybody in the know. re: the above We live in a 1950's ex-council house with solid concrete walls. Obviously there is no insulation and getting it done externally is just far too much cost so we are thinking or doing it internally as we decorate...